Cascadia, DD15 coolant contaminated with oil and how to fix it.
41.9 هزار بار بازدید -
3 سال پیش
-
Common problem with the DD15
Common problem with the DD15 and DD13 is oil will start to contaminate the cooling system. The first place you will notice this will be inside the coolant surge tank (expansion tank). The tank will start to get dark and stain with oil.
This will most likely be the seals at the oil cooler. This will require the complete oil/coolant module to be removed in order to gain access.
The job will take about 6-10 hours, after which the coolant system will need to be flushed (cleaned).
Oil that is removed, must be replaced with new motor oil. New oil filter and coolant filter must be used.
Oil seals will need to be replaced, oil cooler can be used but you must pressure test before reinstalling. Oil cooler must be torqued to 22 ft lb, new mounting gasket must installed and torqued.
If you have any questions, please consult a professional or your manual.
This will most likely be the seals at the oil cooler. This will require the complete oil/coolant module to be removed in order to gain access.
The job will take about 6-10 hours, after which the coolant system will need to be flushed (cleaned).
Oil that is removed, must be replaced with new motor oil. New oil filter and coolant filter must be used.
Oil seals will need to be replaced, oil cooler can be used but you must pressure test before reinstalling. Oil cooler must be torqued to 22 ft lb, new mounting gasket must installed and torqued.
If you have any questions, please consult a professional or your manual.
3 سال پیش
در تاریخ 1400/04/26 منتشر شده
است.
41,960
بـار بازدید شده