Custom made Boss Hoss front end || Machining a decoration piece step-by-step
25.6 هزار بار بازدید -
8 سال پیش
-
I made a one-off unique
I made a one-off unique front end to a V8 powered Boss Hoss motorcycle as a part of Bomber Magazines streetfighter project.
Here's a video from machining couple of decoration pieces under the lower yoke - just to give it more size.
Do notice that the front end is not completed at this video. It is still just at the mock up stage.
Normally I would made a custom clamp for the machining of the bottom side of the pieces - but at the moment I didn't have ANY pieces for making one. That's why I used those universal clamps. Not the best way, but I got the job done. Also the drilling and tapping the threads [for clamping of the piece to front shock] is missing from the video.
If you're into machining, making in general, motorcycles or just videos like this - consider subscribing the channel. Thanks!
More machining:
Facebook: apesmetalshop
Bomber Magazine:
http://www.worldwidebombermagazine.com/
Here's a video from machining couple of decoration pieces under the lower yoke - just to give it more size.
Do notice that the front end is not completed at this video. It is still just at the mock up stage.
Normally I would made a custom clamp for the machining of the bottom side of the pieces - but at the moment I didn't have ANY pieces for making one. That's why I used those universal clamps. Not the best way, but I got the job done. Also the drilling and tapping the threads [for clamping of the piece to front shock] is missing from the video.
If you're into machining, making in general, motorcycles or just videos like this - consider subscribing the channel. Thanks!
More machining:
Facebook: apesmetalshop
Bomber Magazine:
http://www.worldwidebombermagazine.com/
8 سال پیش
در تاریخ 1394/12/21 منتشر شده
است.
25,693
بـار بازدید شده