Linear Rail Bath - Clean your linear rails

A small bath to wash your linear rails in degreaser or isopropyl alcohol.
You should always wash new linear rails to remove any anti-rust or dried grease on the rails.

Fits 150mm MGN7 rails typically fitted to Voron 0.1 3D printers.

Put rail in the bath, add IPA, then slide the carriage back and forth 10 times.  It's amazing how smooth rails are afterwards.

Be careful taking the rail out of the bath, the carriage can now very easily slide off the end of the rail.

STL files are available on Printables  https://www.printables.com/model/2528...

(A small funnel is also included to assist with disposing of cleaning solution)