6th Order Bandpass Subwoofer Design (Part 3)
3.4 هزار بار بازدید -
4 سال پیش
-
In this video series, you
In this video series, you can follow me as I build a new subwoofer for my car.
First rough measurements are made to evaluate port tuning and sound - as expected, some changes had to be made to the box.
Also, added port braces, lid logo and prepared everything for the paint/wood stain and/or varnish. Still have make a decision on the final finish.
Feel free to express your thoughts about the project - you can share it down in the comment section!
Other build videos in this series:
Part 1 - Defining the design goals
https://www.seevid.ir/fa/w/TnUnrprHqzk
Part 2 - Beginning of the build
https://www.seevid.ir/fa/w/6uCCMqXpXyg
Part 4 - Painting and finishing the box
https://www.seevid.ir/fa/w/pwrf5N1KIB4
Part 5 - Report on results
https://www.seevid.ir/fa/w/1meOMMevR0A
Follow me on Instagram - https://www.instagram.com/karliszalitis/
My CAD and STL files from another projects - https://www.thingiverse.com/karliszalitis/designs
You can help me by supporting this channel on Patreon:
https://www.patreon.com/karliszalitis
or you just can buy me a coffee :) - PayPal.Me/karliszalitis
Speakers, that I will be using - GroundZero GZRW15XSPL
https://www.ground-zero-audio.com/en/produkt/gzrw-15xspl/
The amplifier Taramps Smart3 (Williston Audio Labs review)
https://www.seevid.ir/fa/w/DxMGPhNASl4
Subwoofer speaker break in test -
https://www.seevid.ir/fa/w/QKQ3VEJA308
Previous build
https://www.seevid.ir/fa/w/1TP8I1Z1u7Y
4 سال پیش
در تاریخ 1399/09/27 منتشر شده
است.
3,470
بـار بازدید شده