Wanhao Duplicator I3 3D Printer - Switching to PEI as a Build Surface!
17.3 هزار بار بازدید -
8 سال پیش
-
Please visit
Please visit http://www.DIY3DTech.com for more information on this and many other projects! As in this episode we will be converting over to printing on PEI from the standard adhesive build sheets. However what is PEI you ask? Well PEI (Polyetherimide), also known as known as Ultem which is a reusable and "relatively maintenance free" build surface that can be used for both ABS (with a Heated Bed) and PLA (either warmed or cold) requiring no additional adhesives such as glue or tape. PEI is extra appealing due to its "no-surface-prep" conditions, which make it convenient to work with and printing on PEI typically requires no support rafts as parts adhere directly to the surface with no issue.
However it is suggested that after each print, wipe your PEI surface down with 70-91% Isopropyl alcohol, to ensure that you remove away any grease or other residues that may have accumulated on the surface which will help increase your surface adhesion greatly.
Gizmo Dorks PEI Sheet, 8" x 8" 3D Printer Build Surface 1mm thick Polyetherimide Ultem:
http://amzn.to/1porbov
Visit our site:
http://www.DIY3DTech.com
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc):
http://swag.DIY3DTech.com
However it is suggested that after each print, wipe your PEI surface down with 70-91% Isopropyl alcohol, to ensure that you remove away any grease or other residues that may have accumulated on the surface which will help increase your surface adhesion greatly.
Gizmo Dorks PEI Sheet, 8" x 8" 3D Printer Build Surface 1mm thick Polyetherimide Ultem:
http://amzn.to/1porbov
Visit our site:
http://www.DIY3DTech.com
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc):
http://swag.DIY3DTech.com
8 سال پیش
در تاریخ 1395/02/16 منتشر شده
است.
17,346
بـار بازدید شده