Power Electronics and Motor Control Prototyping on CPUFPGA Target Hardware with Simulink Real Time
8.8 هزار بار بازدید -
7 سال پیش
-
See what's new in the
See what's new in the latest release of MATLAB and Simulink: goo.gl/3MdQK1
Download a trial: goo.gl/PSa78r
Based on modern application areas such as power electronics and motor control, this webinar will introduce Rapid Control Prototyping (RCP). We will use Simulink Real-Time, HDL Coder and advanced FPGA target hardware and CPU to perform rapid control prototyping.
We will demonstrate how you can go beyond software-only simulation, to quickly and efficiently test your Simulink control designs in real time while connecting to hardware. We’ll look closely at a brushless motor control example and demonstrate power electronics rapid prototyping using Simulink Real-Time with Speedgoat hardware. You will see how a controls or test engineer can easily configure and run the controller algorithm on a real-time target computer and communicate through high-speed I/O interfaces to power electronics, sensors, and the motor. The new Speedgoat Mobile real-time target machine, leveraging CPU and FPGA subsystem technology, is used for controller prototyping with Simulink Real-Time.
The techniques shown during this presentation cross over into many applications where you are trying to develop high quality software algorithms quickly that will eventually be embedded into a product.
Highlights of the webinar include:
Designing a control system with Simulink by iterating between virtual simulations and rapid prototyping
Introduction to Simulink Real-Time and Speedgoat real-time target machines
Using FPGA-based I/O modules for high-speed interfacing: PWM generation, synchronized current measurements, and quadrature signal decoding
Concurrent Execution between FPGA and a target computer CPU
Power electronics and motor control rapid prototyping demonstration using a brushless motor
7 سال پیش
در تاریخ 1396/02/29 منتشر شده
است.
8,893
بـار بازدید شده