Dual Propeller 3D printed 100 mm Electric Ducted Fan | 1700 KV Motor | Part 2
27.7 هزار بار بازدید -
2 سال پیش
-
This is part 2 guys
This is part 2 guys
Checkout the part 1 by clicking the below link :
• DIY 100 mm Electric Ducted Fan thrust...
Hello guys, I have designed and built a 100 mm Dual propeller ducted fan in this video and compared the thrust of two different propeller configurations. The ducted fan has a 96 mm diameter and is 3D Printed. I am using two DYS Series motors of 1700 Kv.
I have designed a new blade for it.
Check the maximum thrust obtained and use these results for your future projects.
Check out the video to check the thrust test of the motor and make one for you.
Thanks for watching and liking, sharing, and subscribing.
Helps me reach 20k subscribers...:-)
For downloading the 100 mm EDF 3D printing files, visit the below link :
themechninja.com/product/dys-motor-ducted-fan-dual…
Apparatus used in the video:-
M3 Allen nuts and bolts:- IND - amzn.to/3sA0sb7
USA - amzn.to/3y29ij1
Watt meter:- IND - amzn.to/3swB6em
USA - amzn.to/3y3ZiFS
Pulley:- IND - amzn.to/37WqqMF
USA - amzn.to/2WaJkN0
Spring balance:- IND - amzn.to/3gjkDFi
USA - amzn.to/3B2LxcF
Servo Tester :- IND - amzn.to/3B0YAuT
USA - amzn.to/3j1svgl
11.1 Volt battery:- IND - amzn.to/3tvaaLB
USA - amzn.to/3zm0mXy
2 سال پیش
در تاریخ 1401/12/09 منتشر شده
است.
27,743
بـار بازدید شده