Step-By-Step: Enabling Hyper-V for use on Windows 10
51.3 هزار بار بازدید -
9 سال پیش
-
Topics Covered in this Tutorial:1.
Topics Covered in this Tutorial:
1. What is hyper V
2. How to install Hyper V in windows 10
3. How to use Hyper V Manager
4. How to create virtual Switches using Hyper V Manager in windows 10
5. How create VM (Virtual Machines) using hyper V in windows 10
6. How to create checkpoints and revert back it.
Steps for enabling Hyper-V on windows 10
Step 1: Prerequisites
1.The following prerequisites are required to successfully run Client Hyper-V on Windows 10:
2.Windows 10 Pro or Enterprise 64 bit Operating System
3.64 bit processor with Second Level Address Translation (SLAT)
4.4GB system RAM at minimum
5.BIOS-level Hardware Virtualization support
Step 2: Setting Up Hyper-V
1.Ensure that hardware virtualization support is turned on in the BIOS settings
2.Save the BIOS settings and boot up the machine normally
3.Click the search icon (magnified glass) on the taskbar
4.Type turn windows features on or off and select that item
5.Select and enable Hyper-V
6.If Hyper-V was not previously enabled, reboot the machine to apply the change.
NOTE: As a best practice, configure networking for the Hyper-V environment to support external network connections. Also ensure that a virtual switch has been created and is functional.
Click the search icon (magnified glass) on the taskbar, type Hyper-V Manager and select the item
NOTE: Right click Hyper-V Manager to pin it to the task bar
Configure the Hyper V virtual switch for networking.
1.Open the Virtual Switch Manager, found on the Actions panel in the Hyper-V Manager, by typing Hyper-V at the Start Screen
2.Select Virtual Switch Manager in the Actions pane
3.Ensure that External is highlighted, and then click on the Create Virtual Switch button
4.If more than one NIC in is present, ensure that the proper NIC is selected for use on the VM external network connections
Hyper V also have few awesome features like you can set you VM to start with your system or delay with few seconds.
1. What is hyper V
2. How to install Hyper V in windows 10
3. How to use Hyper V Manager
4. How to create virtual Switches using Hyper V Manager in windows 10
5. How create VM (Virtual Machines) using hyper V in windows 10
6. How to create checkpoints and revert back it.
Steps for enabling Hyper-V on windows 10
Step 1: Prerequisites
1.The following prerequisites are required to successfully run Client Hyper-V on Windows 10:
2.Windows 10 Pro or Enterprise 64 bit Operating System
3.64 bit processor with Second Level Address Translation (SLAT)
4.4GB system RAM at minimum
5.BIOS-level Hardware Virtualization support
Step 2: Setting Up Hyper-V
1.Ensure that hardware virtualization support is turned on in the BIOS settings
2.Save the BIOS settings and boot up the machine normally
3.Click the search icon (magnified glass) on the taskbar
4.Type turn windows features on or off and select that item
5.Select and enable Hyper-V
6.If Hyper-V was not previously enabled, reboot the machine to apply the change.
NOTE: As a best practice, configure networking for the Hyper-V environment to support external network connections. Also ensure that a virtual switch has been created and is functional.
Click the search icon (magnified glass) on the taskbar, type Hyper-V Manager and select the item
NOTE: Right click Hyper-V Manager to pin it to the task bar
Configure the Hyper V virtual switch for networking.
1.Open the Virtual Switch Manager, found on the Actions panel in the Hyper-V Manager, by typing Hyper-V at the Start Screen
2.Select Virtual Switch Manager in the Actions pane
3.Ensure that External is highlighted, and then click on the Create Virtual Switch button
4.If more than one NIC in is present, ensure that the proper NIC is selected for use on the VM external network connections
Hyper V also have few awesome features like you can set you VM to start with your system or delay with few seconds.
9 سال پیش
در تاریخ 1394/11/06 منتشر شده
است.
51,357
بـار بازدید شده