Homemade 18" Drum Sander
436.5 هزار بار بازدید -
12 سال پیش
-
Here is my homemade drum
Here is my homemade drum sander. It has a 1 HP 1750 rpm motor on it. The drum has 1" shaft and 1" pillow block bearings I got from the Surpluscenter.com. The lift mechanism has 4 threaded rods at each corner that will raise and lower the table. It will be connected by a chain and sprocket at the bottom. The design of the frame and drum came from woodgears.ca's homemade drum sander plan.
I have now mounted the table and rollers for the conveyor.
Like me on Facebook!
https://www.facebook.com/Thewoodworke...
Follow me on Google+
http://plus.google.com/+thewoodworker01
Follow me on Lumberjocks!
http://lumberjocks.com/thewoodworker01
I have now mounted the table and rollers for the conveyor.
Like me on Facebook!
https://www.facebook.com/Thewoodworke...
Follow me on Google+
http://plus.google.com/+thewoodworker01
Follow me on Lumberjocks!
http://lumberjocks.com/thewoodworker01
12 سال پیش
در تاریخ 1391/03/22 منتشر شده
است.
436,566
بـار بازدید شده