CNC Machining - How to Thread Mill an AR-15 Buffer Tube - Tormach PCNC 1100
68.9 هزار بار بازدید -
11 سال پیش
-
I had always wanted to
I had always wanted to try thread milling with my Tormach PCNC 1100 and I finally bought a thread mill tool a few months back - ends up that, aside from some CAM specifics, it's pretty easy to do. The results are AWESOME! I will definitely use this in lieu of tapping with taps, single point threading, dies, etc on future projects!
This video expands off the Tormach video tutorial on thread milling. I thought the 1 3/16 x 16 TPI thread on an AR-15 lower receiver and buffer tube would be a great example of a thread milled part. In this video, I walk through the CAD design of the part, the CAM in SprutCAM including some tips and tricks, then we make the part! 5 Reasons to Use a Fixture Plate on Your CNC Machine: https://bit.ly/3sNA4uH
This video expands off the Tormach video tutorial on thread milling. I thought the 1 3/16 x 16 TPI thread on an AR-15 lower receiver and buffer tube would be a great example of a thread milled part. In this video, I walk through the CAD design of the part, the CAM in SprutCAM including some tips and tricks, then we make the part! 5 Reasons to Use a Fixture Plate on Your CNC Machine: https://bit.ly/3sNA4uH
11 سال پیش
در تاریخ 1392/08/30 منتشر شده
است.
68,940
بـار بازدید شده