Fix Bluetooth Not working on Mac in macOS Sonoma [11 Real Solutions]
1.8 هزار بار بازدید -
4 ماه پیش
-
Here's a fix the Bluetooth
Here's a fix the Bluetooth is not Working on Mac. Setup and Enable Bluetooth on Mac if it's disconnecting, Dropping, and Connection rejected. Running on macOS Sonoma & any macOS.
Sudo pkill bluetoothd
sudo rm -rf /Library/Preferences/SystemConfiguration/com.apple.Bluetooth
Timestamp:-
00:00 Intro
00:28 Restart the Mac
00:47 Disconnect all Bluetooth devices
01:23 Turn off & on Bluetooth.
02:40 Turn on Bluetooth sharing.
03:19 Reset the Bluetooth module
03:50 Check for Software Updates.
04:19 Delete Bluetooth Plist files
05:39 Remove the Bluetooth Profile
06:27 Check for Interference
06:43 Reset SMC
07:22 Contact Apple Support
Here are some potential causes of Bluetooth not working on Mac displayed on-screen video.
1. The Bluetooth device is not connected to the Mac.
2. Corrupt Plist files.
3. Incorrect Bluetooth device settings.
4. Pending software update.
5. Bluetooth may greyed out.
6. Low battery [Macbook & Device].
7. Interferences between Bluetooth & devices.
8. Crashed bluetooth module.
As you know, bluetooth makes short-range connections between your Mac and other devices, such as a mouse, keyboard, Airpods, and Other bluetooth devices. So, ensure they are near your Mac device up to 10 meters.
The first helpful method is to Restart the Mac.
Let's look at the second convenient solution: Disconnect all Bluetooth devices.
USB devices like mouse, keyboard, or plugged-in drives can affect your Bluetooth connection. That's why you should manually remove all connected USB devices and restart your Mac.
You can disconnect the bluetooth device from the bluetooth settings.
If the problem remains, follow the third beneficial solution: Turn off and on Bluetooth.
Go to the control center for quick access to turn the Bluetooth toggle off, wait a moment, and turn back on the bluetooth toggle.
Note: If you're using a Mac desktop PC, you cannot reconnect your wireless bluetooth devices, such as a keyboard, trackpad, or mouse.
Go to the control center and click on bluetooth. Now, select the Turn Bluetooth Off option.
Also, you should check for the Bluetooth hardware in the System Information.
Then, open Spotlight Search by Pressing the command space key on your Mac keyboard. Now, type system information in the search bar.
Click the Bluetooth option in the device list on the left panel. Check if the Bluetooth hardware information shows up.
If you see the Bluetooth hardware information, there is no Bluetooth hardware issue. Move to the next solutions.
If the problem persists, follow the fourth functional solution, Turn on Bluetooth sharing.
Sudo pkill bluetoothd
After that, you need to enter your Mac admin password. Enter your password. Now, quit the terminal and restart your Mac. The bluetooth will refresh automatically. That’s it.
If you still have a problem, follow the sixth beneficial solution, Check for Software Updates.
Go to the Apple menu at the top left corner and select System Settings. Now, click on the General section. Then, choose Software Update and wait until your device checks for a new update.
follow the seventh valuable solution, Delete Bluetooth Plist files to fix the problem.
This solution may help you remove Corrupted files that can cause pairing problems and slow down your productivity.
Also, it will Reset your preferences and let your Mac create fresh files for better performance. Follow the steps performed on-screen video.
Launch the Finder app on your Mac device and select Go from the menu bar.
Now, select Go to folder.
After that, enter your system configuration path defined in the video description and on-screen.
/Library/Preferences/
Then, find the plist files and drag & drop them to the Desktop to create a backup folder on the desktop.
com.apple.Bluetooth.plist
/Library/Preferences/ByHost
Press the return key.
Now, Find the plist file and drag & drop it to the Desktop to create a backup folder on the desktop.
com.apple.Bluetooth.xxx.plist
Now, select the plist file by host and right click on the mouse, and select the move to trash option. Then, confirm the delete option.
Open the spotlight search and type to open the terminal. Now, copy and paste the code given in the video description.
You need to enter your Mac passcode to confirm. Then, press the return key.
Now, check whether the bluetooth works.
If the problem remains, follow the ninth useful solution, Check for Interference. This solution may help you reduce the interference between your Mac and bluetooth device.
Now, the tenth advantageous solution is to Reset SMC.
The reset SMC process varies depending on Mac models.
For Apple silicon M1 & M2 chip Macs, restarting the Mac usually helps.
If none of the previous solutions resolve the issue, follow the eleventh favorable solution, Contact Apple Support.
Get free repair & replacement service if your device is under warranty.
Sudo pkill bluetoothd
sudo rm -rf /Library/Preferences/SystemConfiguration/com.apple.Bluetooth
Timestamp:-
00:00 Intro
00:28 Restart the Mac
00:47 Disconnect all Bluetooth devices
01:23 Turn off & on Bluetooth.
02:40 Turn on Bluetooth sharing.
03:19 Reset the Bluetooth module
03:50 Check for Software Updates.
04:19 Delete Bluetooth Plist files
05:39 Remove the Bluetooth Profile
06:27 Check for Interference
06:43 Reset SMC
07:22 Contact Apple Support
Here are some potential causes of Bluetooth not working on Mac displayed on-screen video.
1. The Bluetooth device is not connected to the Mac.
2. Corrupt Plist files.
3. Incorrect Bluetooth device settings.
4. Pending software update.
5. Bluetooth may greyed out.
6. Low battery [Macbook & Device].
7. Interferences between Bluetooth & devices.
8. Crashed bluetooth module.
As you know, bluetooth makes short-range connections between your Mac and other devices, such as a mouse, keyboard, Airpods, and Other bluetooth devices. So, ensure they are near your Mac device up to 10 meters.
The first helpful method is to Restart the Mac.
Let's look at the second convenient solution: Disconnect all Bluetooth devices.
USB devices like mouse, keyboard, or plugged-in drives can affect your Bluetooth connection. That's why you should manually remove all connected USB devices and restart your Mac.
You can disconnect the bluetooth device from the bluetooth settings.
If the problem remains, follow the third beneficial solution: Turn off and on Bluetooth.
Go to the control center for quick access to turn the Bluetooth toggle off, wait a moment, and turn back on the bluetooth toggle.
Note: If you're using a Mac desktop PC, you cannot reconnect your wireless bluetooth devices, such as a keyboard, trackpad, or mouse.
Go to the control center and click on bluetooth. Now, select the Turn Bluetooth Off option.
Also, you should check for the Bluetooth hardware in the System Information.
Then, open Spotlight Search by Pressing the command space key on your Mac keyboard. Now, type system information in the search bar.
Click the Bluetooth option in the device list on the left panel. Check if the Bluetooth hardware information shows up.
If you see the Bluetooth hardware information, there is no Bluetooth hardware issue. Move to the next solutions.
If the problem persists, follow the fourth functional solution, Turn on Bluetooth sharing.
Sudo pkill bluetoothd
After that, you need to enter your Mac admin password. Enter your password. Now, quit the terminal and restart your Mac. The bluetooth will refresh automatically. That’s it.
If you still have a problem, follow the sixth beneficial solution, Check for Software Updates.
Go to the Apple menu at the top left corner and select System Settings. Now, click on the General section. Then, choose Software Update and wait until your device checks for a new update.
follow the seventh valuable solution, Delete Bluetooth Plist files to fix the problem.
This solution may help you remove Corrupted files that can cause pairing problems and slow down your productivity.
Also, it will Reset your preferences and let your Mac create fresh files for better performance. Follow the steps performed on-screen video.
Launch the Finder app on your Mac device and select Go from the menu bar.
Now, select Go to folder.
After that, enter your system configuration path defined in the video description and on-screen.
/Library/Preferences/
Then, find the plist files and drag & drop them to the Desktop to create a backup folder on the desktop.
com.apple.Bluetooth.plist
/Library/Preferences/ByHost
Press the return key.
Now, Find the plist file and drag & drop it to the Desktop to create a backup folder on the desktop.
com.apple.Bluetooth.xxx.plist
Now, select the plist file by host and right click on the mouse, and select the move to trash option. Then, confirm the delete option.
Open the spotlight search and type to open the terminal. Now, copy and paste the code given in the video description.
You need to enter your Mac passcode to confirm. Then, press the return key.
Now, check whether the bluetooth works.
If the problem remains, follow the ninth useful solution, Check for Interference. This solution may help you reduce the interference between your Mac and bluetooth device.
Now, the tenth advantageous solution is to Reset SMC.
The reset SMC process varies depending on Mac models.
For Apple silicon M1 & M2 chip Macs, restarting the Mac usually helps.
If none of the previous solutions resolve the issue, follow the eleventh favorable solution, Contact Apple Support.
Get free repair & replacement service if your device is under warranty.
4 ماه پیش
در تاریخ 1402/12/11 منتشر شده
است.
1,862
بـار بازدید شده