2007-2009 Shelby GT500- Bolt-On Build-Ups:Stage 3
117.5 هزار بار بازدید -
10 سال پیش
-
Watch us put down nearly
Watch us put down nearly 600 horsepower to the tires in a 2007-2009 Shelby GT500 with only bolt-on mods. Check out all 3 Stages at: http://www.americanmuscle.com/07-09-s...
In Stage 3 of our Bolt-On Build-Up, we install:
Ford Racing Twin 65mm Cobra Jet Throttle Body (07-14 GT500) - http://www.americanmuscle.com/frpp-co...
Flowmaster Outlaw Series Axle-Back Exhaust (05-10 GT, GT500) - http://www.americanmuscle.com/flowmas...
Gates 10-Rib Serpentine Belt - 85-7/8in (07-14 GT500) - http://www.americanmuscle.com/gates-s...
Innovators West 10% Overdrive Harmonic Balancer Pulley (07-14 GT500) - http://www.americanmuscle.com/overdri...
AFCO Pro-Series Heat Exchanger w/ Fans (07-12 GT500) - http://www.americanmuscle.com/afco-pr...
Stainless Works Off-Road X-Pipe (07-10 GT500) - http://www.americanmuscle.com/stainle...
With all of these new mods in place, we hit our Dynojet 224xLC for some dyno results. With over 581 horsepower and 600 torque to the rear tires, that made for a peak gain of 33 horsepower and gains of 47 horsepower and 59 torque throughout the curve! Our friends at Bama Performance loaded up their SCT X3/X4 custom tuner and hit the dyno for the results!
Stay tuned. We're building a 2010-2012 Shelby GT500 and a 2013-2014, as well. Make sure to subscribe and for all things Mustang, keep it right here at AmericanMuscle.com.
In Stage 3 of our Bolt-On Build-Up, we install:
Ford Racing Twin 65mm Cobra Jet Throttle Body (07-14 GT500) - http://www.americanmuscle.com/frpp-co...
Flowmaster Outlaw Series Axle-Back Exhaust (05-10 GT, GT500) - http://www.americanmuscle.com/flowmas...
Gates 10-Rib Serpentine Belt - 85-7/8in (07-14 GT500) - http://www.americanmuscle.com/gates-s...
Innovators West 10% Overdrive Harmonic Balancer Pulley (07-14 GT500) - http://www.americanmuscle.com/overdri...
AFCO Pro-Series Heat Exchanger w/ Fans (07-12 GT500) - http://www.americanmuscle.com/afco-pr...
Stainless Works Off-Road X-Pipe (07-10 GT500) - http://www.americanmuscle.com/stainle...
With all of these new mods in place, we hit our Dynojet 224xLC for some dyno results. With over 581 horsepower and 600 torque to the rear tires, that made for a peak gain of 33 horsepower and gains of 47 horsepower and 59 torque throughout the curve! Our friends at Bama Performance loaded up their SCT X3/X4 custom tuner and hit the dyno for the results!
Stay tuned. We're building a 2010-2012 Shelby GT500 and a 2013-2014, as well. Make sure to subscribe and for all things Mustang, keep it right here at AmericanMuscle.com.
10 سال پیش
در تاریخ 1393/01/03 منتشر شده
است.
117,592
بـار بازدید شده