Sumo Springs - 2016 Ford Transit Van XLT350 SuperSprings CSS-1195 & SSR-121-40 - Easy Install DIY!
2.8 هزار بار بازدید -
8 ماه پیش
-
https://www.superspringsinternational...?ref=yjy0yty
https://amzn.to/3SMMilW - SuperSprings CSS-1195 | Coil SumoSprings for various applications | 1.95 inch inner wall height, Black
https://amzn.to/4bkMYWK - SuperSprings SSR-121-40 | SumoSprings Rear for Ford Transit 150|250|350, Blue
https://amzn.to/3pNDMr7 - Performance Tool W38181 3/8-Inch Drive Flex Head Long Ratchet
https://amzn.to/3HLASbO - Milwaukee 2567-20 M12 FUEL Brushless Lithium-Ion 3/8 in. Cordless High Speed Ratchet (Tool Only)
https://amzn.to/3HIhJYb - GEARWRENCH 3/8" Drive Micrometer Torque Wrench 10-100 ft/lbs. - 85062M , Black
Just a quick video showing how I installed SumoSprings on my 2016 Ford Transit XLT350 Passenger Van. The front was super easy and only took a few minutes after lifting the van up a bit. Because of my lift, I put the CoilSumoSprings with the opening facing in. The team at SuperSprings approved this modification to the installation because of the different angle of my springs/struts caused by the offset spacer at the top pushing it closer to the frame/body of the van. The front Tires used to rub a little bit when doing tight turns or turning over bumps and to my surprise, that hasn't happened at all since I put these Coil Sumo Springs in place.
On the rear, this is basically a longer softer bump stop / Rubber 'Spring' that will help with stability and better ride height when loaded or towing. This is a great alternative to air bags and does not require any maintenance after installation. I decided to remove the 2" bump stop extensions that I had in place as a part of the lift kit. They recommend 1/2" - 1" space under the SumoSpring to the contact point on the axle. By using both the 1" and 1/2" spacers in the kit, it looks like I have about 1/2" of space now. I could've probably gotten away with only the 1" spacer, but I liked the idea of having it closer to the axle contact point and thought it might help prevent the body roll and/or rear end sag when loaded. I am very happy with how I set it up and it's working great.
If you have a heavy rig, or want better handling with reduced sway, sag, and a ride that is less harsh without being too firm, I would recommend you pick these up.
Thank you to SuperSprings for reaching out and sending these to me.
From the website:
"Coil SumoSprings are made from the same material as our other SumoSprings products – a micro-cellular polyurethane that decreases vibration, stabilizes sway, and tightens up your existing factory coils. This upgrade adds up to 30% additional capacity to your coils, creating a cushion effect and stopping unwanted dip and roll.
Rear SumoSprings are a maintenance-free suspension enhancement built to create a better journey. Handmade from micro-cellular polyurethane, they are designed to reduce rear-end sag and increase load carrying ability while decreasing vibration, stabilizing sway, and softening harsh rebounds.
The SSR-121-40 has a 1,000 lb capacity when compressed at 50%. The Blue SumoSprings shouldn’t be compressed past 70% of their original height in order to keep full memory rebound."
Tools needed:
13mm socket and ratchet and/or wrench if you have the stock rear bump stops
17mm sockets and extensions and ratchets or impacts
Torque wrench
Thanks for watching!
Please Subscribe!
-Dan the Fix it Man
www.danthefixitman.org
Song used in the video:
'Sage' by Slenderbeats
This video is intended for entertainment and informational purposes only. Any repairs you make are your responsibility. I am not liable for any damages to you or your vehicle or your property.
As an Amazon Associate I earn from qualifying purchases.
Any other links are also affiliate links whenever possible.
This means that I earn commissions if you buy something from them.
I really appreciate your support.
#vanlife #sumosprings
https://amzn.to/3SMMilW - SuperSprings CSS-1195 | Coil SumoSprings for various applications | 1.95 inch inner wall height, Black
https://amzn.to/4bkMYWK - SuperSprings SSR-121-40 | SumoSprings Rear for Ford Transit 150|250|350, Blue
https://amzn.to/3pNDMr7 - Performance Tool W38181 3/8-Inch Drive Flex Head Long Ratchet
https://amzn.to/3HLASbO - Milwaukee 2567-20 M12 FUEL Brushless Lithium-Ion 3/8 in. Cordless High Speed Ratchet (Tool Only)
https://amzn.to/3HIhJYb - GEARWRENCH 3/8" Drive Micrometer Torque Wrench 10-100 ft/lbs. - 85062M , Black
Just a quick video showing how I installed SumoSprings on my 2016 Ford Transit XLT350 Passenger Van. The front was super easy and only took a few minutes after lifting the van up a bit. Because of my lift, I put the CoilSumoSprings with the opening facing in. The team at SuperSprings approved this modification to the installation because of the different angle of my springs/struts caused by the offset spacer at the top pushing it closer to the frame/body of the van. The front Tires used to rub a little bit when doing tight turns or turning over bumps and to my surprise, that hasn't happened at all since I put these Coil Sumo Springs in place.
On the rear, this is basically a longer softer bump stop / Rubber 'Spring' that will help with stability and better ride height when loaded or towing. This is a great alternative to air bags and does not require any maintenance after installation. I decided to remove the 2" bump stop extensions that I had in place as a part of the lift kit. They recommend 1/2" - 1" space under the SumoSpring to the contact point on the axle. By using both the 1" and 1/2" spacers in the kit, it looks like I have about 1/2" of space now. I could've probably gotten away with only the 1" spacer, but I liked the idea of having it closer to the axle contact point and thought it might help prevent the body roll and/or rear end sag when loaded. I am very happy with how I set it up and it's working great.
If you have a heavy rig, or want better handling with reduced sway, sag, and a ride that is less harsh without being too firm, I would recommend you pick these up.
Thank you to SuperSprings for reaching out and sending these to me.
From the website:
"Coil SumoSprings are made from the same material as our other SumoSprings products – a micro-cellular polyurethane that decreases vibration, stabilizes sway, and tightens up your existing factory coils. This upgrade adds up to 30% additional capacity to your coils, creating a cushion effect and stopping unwanted dip and roll.
Rear SumoSprings are a maintenance-free suspension enhancement built to create a better journey. Handmade from micro-cellular polyurethane, they are designed to reduce rear-end sag and increase load carrying ability while decreasing vibration, stabilizing sway, and softening harsh rebounds.
The SSR-121-40 has a 1,000 lb capacity when compressed at 50%. The Blue SumoSprings shouldn’t be compressed past 70% of their original height in order to keep full memory rebound."
Tools needed:
13mm socket and ratchet and/or wrench if you have the stock rear bump stops
17mm sockets and extensions and ratchets or impacts
Torque wrench
Thanks for watching!
Please Subscribe!
-Dan the Fix it Man
www.danthefixitman.org
Song used in the video:
'Sage' by Slenderbeats
This video is intended for entertainment and informational purposes only. Any repairs you make are your responsibility. I am not liable for any damages to you or your vehicle or your property.
As an Amazon Associate I earn from qualifying purchases.
Any other links are also affiliate links whenever possible.
This means that I earn commissions if you buy something from them.
I really appreciate your support.
#vanlife #sumosprings
8 ماه پیش
در تاریخ 1402/11/13 منتشر شده
است.
2,858
بـار بازدید شده