Shapeoko CNC: Sliding Box
65.8 هزار بار بازدید -
5 سال پیش
-
This is a CNC box
This is a CNC box design with a sliding lid held on by magnets. The magnets were purchased off of Ebay (https://www.ebay.com/itm/1-4-x-1-4-x-...) The box is created on the Shapeoko using Carbide Create.
5 سال پیش
در تاریخ 1398/02/15 منتشر شده
است.
65,863
بـار بازدید شده