How to use a Hoyer Patient Lift to transfer a patient from the Bed to their Wheelchair
231.3 هزار بار بازدید -
6 سال پیش
-
We demonstrate the proper way
We demonstrate the proper way to transfer a patient from their bed to a wheelchair. Check out the full playlist here: https://bit.ly/2Jc3VFI
----------
Rehabmart was founded by two occupational therapists with a passion for helping people find answers to common healthcare struggles. Learn more about Rehabmart's line of Patient Lifts and discover more lifestyle resources at Caregiver University in the links below!
https://www.rehabmart.com/category/pa...
http://www.rehabmart.com/blog/
Subscribe for more product reviews, healthcare updates, and practical care-giving advice!
----------
The first step to any transfer is ensuring that you have the correct sling so be sure to check out our detailed sling selection guide before diving into these how-to videos. Today we're going to demonstrate how to safely transfer a patient from a bed to their wheelchair.
Begin by folding the sling in half with the smooth side in and place the sling beside the patient.
Gently roll the patient to one side, line the folded sling up with the patient's tailbone and head, then roll half of the sling up and tuck it under the patient.
Carefully roll the patient to their other side and unroll the sling so that it is laying flat with the smooth side up before returning the patient to a lying position.
Gently raise each of the patient's legs to pull the straps underneath and over the patient's legs.
You want the straps to be mid-thigh on the patient for the most comfortable transfer.
Finally, cross the legs straps, pulling one strap through the other, and you're ready to bring in your lift.
Approach the patient with the lift and lock it in place once it is in position.
Connect your sling's loops to the lift bar, keeping in mind that the shorter loops will result in a more reclined position.
Before lifting, make sure that the patient is fully inside the sling and that the straps and loops are not caught on the bed.
With one hand on the patient and one hand on the lift controls, slowly begin lifting the patient.
Once the patient has been lifted fully off the bed, you can unlock the lift and move the patient to their wheelchair.
Lock the wheelchair in place and position the patient over their chair.
With one hand on the patient and one hand on the lift controls, slowly begin lowering the patient.
As the patient's wheelchair is locked in place while the lift is not, the lift will naturally move to adjust its center of gravity over the chair while you lower the patient.
Unhook the sling loops from the lift and move the lift out of the way.
Gently lift each of the patient's legs to remove the leg straps and have the patient lean forward slightly to remove the sling.
That's how you effectively and safely transfer a patient from a bed to their wheelchair. Be sure to check out our other videos for more tips and techniques on patient transfers.
----------
Rehabmart was founded by two occupational therapists with a passion for helping people find answers to common healthcare struggles. Learn more about Rehabmart's line of Patient Lifts and discover more lifestyle resources at Caregiver University in the links below!
https://www.rehabmart.com/category/pa...
http://www.rehabmart.com/blog/
Subscribe for more product reviews, healthcare updates, and practical care-giving advice!
----------
The first step to any transfer is ensuring that you have the correct sling so be sure to check out our detailed sling selection guide before diving into these how-to videos. Today we're going to demonstrate how to safely transfer a patient from a bed to their wheelchair.
Begin by folding the sling in half with the smooth side in and place the sling beside the patient.
Gently roll the patient to one side, line the folded sling up with the patient's tailbone and head, then roll half of the sling up and tuck it under the patient.
Carefully roll the patient to their other side and unroll the sling so that it is laying flat with the smooth side up before returning the patient to a lying position.
Gently raise each of the patient's legs to pull the straps underneath and over the patient's legs.
You want the straps to be mid-thigh on the patient for the most comfortable transfer.
Finally, cross the legs straps, pulling one strap through the other, and you're ready to bring in your lift.
Approach the patient with the lift and lock it in place once it is in position.
Connect your sling's loops to the lift bar, keeping in mind that the shorter loops will result in a more reclined position.
Before lifting, make sure that the patient is fully inside the sling and that the straps and loops are not caught on the bed.
With one hand on the patient and one hand on the lift controls, slowly begin lifting the patient.
Once the patient has been lifted fully off the bed, you can unlock the lift and move the patient to their wheelchair.
Lock the wheelchair in place and position the patient over their chair.
With one hand on the patient and one hand on the lift controls, slowly begin lowering the patient.
As the patient's wheelchair is locked in place while the lift is not, the lift will naturally move to adjust its center of gravity over the chair while you lower the patient.
Unhook the sling loops from the lift and move the lift out of the way.
Gently lift each of the patient's legs to remove the leg straps and have the patient lean forward slightly to remove the sling.
That's how you effectively and safely transfer a patient from a bed to their wheelchair. Be sure to check out our other videos for more tips and techniques on patient transfers.
6 سال پیش
در تاریخ 1397/01/13 منتشر شده
است.
231,303
بـار بازدید شده