How to calculate the correct elevations of stations using Two Peg Test of Level|Two Peg Test Method

Master Civil Engineering
Master Civil Engineering
28.9 هزار بار بازدید - 2 سال پیش - In this video, we are
In this video, we are going to learn how to calculate the correct elevations of stations using the Two Peg Test Method of Dumpy Level.
#TwoPegTest #DumpyLevel #FEExam #Levelling #ncees #feexam #gate2023 #gatecivil2024 #gatecivilengineering

Question: Two pegs A and B are driven in the ground at a distance of about 120 m. A dumpy level is set up at station Q exactly mid-way between pegs A and B. The staff readings on pegs A and B were found to be 3.513 m and 3.149 m. The instrument was then moved and set up at a point P beyond peg A, in line BA produced at a distance of 20 m from A. The staff readings on pegs A and B were 1.763 m and 0.847 m respectively. What is the true difference in elevation between the two points? With the level in the same position at P what rod readings on B should the line of sight is adjusted. Check these reading against the true difference in elevation previously determined.

Also Learn how to calculate correct elevation of stations using Reciprocal Levelling.
Reciprocal Levelling|Curvature, Refra...
2 سال پیش در تاریخ 1400/12/11 منتشر شده است.
28,990 بـار بازدید شده
... بیشتر