Switching Back to EzCad2 From LightBurn
13.3 هزار بار بازدید -
2 سال پیش
-
How to re-enable EzCad2 Drivers
How to re-enable EzCad2 Drivers after setting up LightBurn for galvo. This is useful if you need to take advantage of any tools in EzCad2 that LightBurn does not yet support.
LightBurn For Galvo Docs:
https://lbrn.info/KslYH
EZCAD Driver Reversion Docs:
https://lbrn.info/A92sh
Setup Guide Docs:
https://lbrn.info/LpLY9
If you need help, please come to our support forum at http://forum.lightburnsoftware.com or email us at [email protected]
LightBurn For Galvo Docs:
https://lbrn.info/KslYH
EZCAD Driver Reversion Docs:
https://lbrn.info/A92sh
Setup Guide Docs:
https://lbrn.info/LpLY9
If you need help, please come to our support forum at http://forum.lightburnsoftware.com or email us at [email protected]
2 سال پیش
در تاریخ 1401/04/09 منتشر شده
است.
13,395
بـار بازدید شده