Prusa MK3s Misumi Bearings and Rods Upgrade
25.8 هزار بار بازدید -
23 ساعت پیش
-
See how you I replaced
See how you I replaced linear bearings and rods(shafts) on my Prusa MK3s with higher quality Misumi parts.
I've attempted to cut some corners and remove minimum amount of parts just so I can get to the bearings and rods.
I'll try to show everything in detail but I will also show mistakes that I made. So please watch video in its entirety first. Also to save some time I do not go into details on how to re-assemble everything. You can either follow disassembly instructions in reverse or go check official prusa assembly manual for guidance.
Here's list of parts you will need:
(6x) LMU8 Bearings (a.k.a. bushings) (buy 10 if you plan to upgrade Z axis)
(2x) SFJ8-370 Linear Shafts (rods) for X-axis (370 mm)
(2x) SFJ8-330 Linear Shafts (rods) for Y-axis (330 mm)
Lithium Grease (amzn.to/2WyEffv)
Greasing Cap: www.thingiverse.com/thing:1128781
99.9 Isopropyl Aclohol
Thin Zip-Ties
Please support me by visiting my online store: lensdigital.com/shop
23 ساعت پیش
در تاریخ 1403/07/16 منتشر شده
است.
25,876
بـار بازدید شده