Best Sunlu resin for your application? Standard resin vs ABS-Like vs PA-Like

This is an ultimate test of Sunlu resin materials, to see which is best from these three materials:
Standard resin, ABS-Like and PA-Like (or Nylon like) resin.
Besides my regular test objects for mechanical testing, I have some new test specimens too. The curing time is also included in this test, I have 2 and 20 minutes cured versions.

Sunlu UV resins: https://www.sunlu.com/collections/uv-...
These test objects are sent to me by Filasin company. https://www.filasin.com/
Mentioned in the video: Loot studios (figures): https://lootstudios.com/
Results download from: https://www.mytechfun.com/video/280
Patreon supporters have access to a summary table to compare these results to all others I did earlier.
Patreon: mytechfun
If you like my work, there are other supporting methods, for example: like or share this video or just buy me a coffee :-)
https://www.buymeacoffee.com/mytechfun
All SLA related videos: SLA - resin 3D printing

0:00 Introduction
1:07 Contents of one package
1:56 Shrinking test
3:30 Exposition time test cards
4:12 Figures - dropping test
6:31 Spring test
7:44 Tensile (pulling) test
8:15 Layer adhesion test
8:45 Torque (twist) test
9:31 Bending test
10:25 Shear test
10:51 Impact test
12:00 Temperature test
12:59 Creep test
14:31 Results
19:58 Conclusions

#3dprinting #sla3dprinting #resin3dprinting #sunlu #sunluresin

• #science_technology
• #sla
• #3d_printing
• #resin_3d_printing
• #sunlu_resin