Foam Wing Core Cutter. How to BEST use a hotwire cutter.
29.3 هزار بار بازدید -
2 سال پیش
-
If you've ever wanted to
If you've ever wanted to make a vacuum bagged wing for a #dlg scratch build, then watch how this gravity cutter will help you get a super smooth accurate cut.
Currently using it for a #f3k build, but would work for any #rc aircraft airfoil or any project
needing #hotwire foam cuts.
In principle it's very basic, but you can't argue with the results and you won't have to waste time sanding out imperfections.
I've left a link for you if your interested in the plans and all files for this build.
Don't forget to Subscribe! https://www.seevid.ir/c/amonus-air21...
Build Links:
Drop Arm Gravity Feed Cutter Table + Hot Wire Bow Plans
https://www.rcsoaringdigest.com/pdfs/...
Synergyll airfoil dat files + wing plans+all files
https://drive.google.com/drive/folder...
Currently using it for a #f3k build, but would work for any #rc aircraft airfoil or any project
needing #hotwire foam cuts.
In principle it's very basic, but you can't argue with the results and you won't have to waste time sanding out imperfections.
I've left a link for you if your interested in the plans and all files for this build.
Don't forget to Subscribe! https://www.seevid.ir/c/amonus-air21...
Build Links:
Drop Arm Gravity Feed Cutter Table + Hot Wire Bow Plans
https://www.rcsoaringdigest.com/pdfs/...
Synergyll airfoil dat files + wing plans+all files
https://drive.google.com/drive/folder...
2 سال پیش
در تاریخ 1401/09/10 منتشر شده
است.
29,361
بـار بازدید شده