Solidworks: MK4 Pillowed Surface and Corner
1 هزار بار بازدید -
2 سال پیش
-
I was working on making
I was working on making my MK3 pillowed form model into one that is fully controlled via equations and global variables. While doing this, I decided that there had to be better way to set up the corner. The result; MK4 pillowed surface and corner... hopefully the last time I feel inclined to investigate this!
If you want to see how MK3 was set up, you can view it here.
Solidworks: MK3 Pillowed Form/Corner
If you find this video useful, please subscribe. Cheers, AJ.
The file in the video can be downloaded here...
https://drive.google.com/file/d/1AjiD...
For more Solidworks videos, please visit my channel.
@andrewjacksondesignstudio
Please visit my site for more information. https://ajdesignstudio.co.nz/
#solidworks #industrialdesign
If you want to see how MK3 was set up, you can view it here.
Solidworks: MK3 Pillowed Form/Corner
If you find this video useful, please subscribe. Cheers, AJ.
The file in the video can be downloaded here...
https://drive.google.com/file/d/1AjiD...
For more Solidworks videos, please visit my channel.
@andrewjacksondesignstudio
Please visit my site for more information. https://ajdesignstudio.co.nz/
#solidworks #industrialdesign
2 سال پیش
در تاریخ 1401/05/18 منتشر شده
است.
1,078
بـار بازدید شده