How To Clean Battery Corrosion From Contacts (Alkaline Batteries)
353 هزار بار بازدید -
12 سال پیش
-
This is how to clean
This is how to clean the blue-green-white corrosion from battery contacts caused by alkaline batteries. You can save those expensive electronic gadgets, and not have to throw them away. Our carbon monoxide detector started beeping with a low battery signal. When i went to replace the batteries, I found there was corrosion on the battery contacts. Not sure if the batteries had leaked, or what. Fortunately, it wasn't too big of a mess in the battery compartment. So I cleaned the corrosion off, and made a video at the same time.
▶ SUBSCRIBE & HIT THE 🔔 http://bit.ly/SubRJTheBikeGuy
👍 And please give my video a thumbs up 👍
▶FACEBOOK.com/RJTheBikeGuy
Facebook: RJTheBikeGuy
▶TOOLS
http://www.rjthebikeguy.com/tools
▶SHIRTS
http://bit.ly/RJBikeGuyShirts
▶WEBPAGE
http://www.RJTheBikeGuy.com
▶ SUBSCRIBE & HIT THE 🔔 http://bit.ly/SubRJTheBikeGuy
👍 And please give my video a thumbs up 👍
▶FACEBOOK.com/RJTheBikeGuy
Facebook: RJTheBikeGuy
▶TOOLS
http://www.rjthebikeguy.com/tools
▶SHIRTS
http://bit.ly/RJBikeGuyShirts
▶WEBPAGE
http://www.RJTheBikeGuy.com
12 سال پیش
در تاریخ 1391/10/07 منتشر شده
است.
353,011
بـار بازدید شده