Zebra ZC300 Ribbon Color Detection Failed 5007 | Support- 01823021975
36.5 هزار بار بازدید -
3 سال پیش
-
আসসালামু আলাইকুম, ID Card Printer
আসসালামু আলাইকুম,
ID Card Printer Service Center এ আপনাকে স্বাগতম। Universe IT and Automation Ltd আইডি কার্ড প্রিন্টিং এর সকল সোলিউশন দিয়ে থাকেন। যে কোন ID Card প্রিন্টারের সমস্যার জন্য আমাদের সাথে যোগাযোগ করুন:
Universe IT and Automation Ltd.
Mob- 01823-021975
Web: www.universeita.com
Corporate office: Flat-4D, H-9/2, Road-Garden Street (Shyamoli Mat opposite), Ring-Road, Shaymoli, Dhaka-1207.
********---------*******
Calibrating Ribbon Errors on ZC100 and ZC300 Series Card Printers:
Issue / Question:
• Error Code: 5001- Out of ribbon
• Error Code: 5007- Ribbon color detection failed on
Solution:
On your PC, Go to Devices and Printers / Printer and Scanners.
1. Right-click on your card printer model (ZC100 or ZC300), then select Printer Preferences.
2. Click the Advanced tab located at the top-right panel.
3. Expand the Sensors and Calibration tab and click Calibration.
4. In the Calibration section, select Ribbon from the drop-down menu and click the Calibrate button.
5. When the calibration process is complete, reinsert the ribbon in the printer.
ID Card Printer Service Center এ আপনাকে স্বাগতম। Universe IT and Automation Ltd আইডি কার্ড প্রিন্টিং এর সকল সোলিউশন দিয়ে থাকেন। যে কোন ID Card প্রিন্টারের সমস্যার জন্য আমাদের সাথে যোগাযোগ করুন:
Universe IT and Automation Ltd.
Mob- 01823-021975
Web: www.universeita.com
Corporate office: Flat-4D, H-9/2, Road-Garden Street (Shyamoli Mat opposite), Ring-Road, Shaymoli, Dhaka-1207.
********---------*******
Calibrating Ribbon Errors on ZC100 and ZC300 Series Card Printers:
Issue / Question:
• Error Code: 5001- Out of ribbon
• Error Code: 5007- Ribbon color detection failed on
Solution:
On your PC, Go to Devices and Printers / Printer and Scanners.
1. Right-click on your card printer model (ZC100 or ZC300), then select Printer Preferences.
2. Click the Advanced tab located at the top-right panel.
3. Expand the Sensors and Calibration tab and click Calibration.
4. In the Calibration section, select Ribbon from the drop-down menu and click the Calibrate button.
5. When the calibration process is complete, reinsert the ribbon in the printer.
3 سال پیش
در تاریخ 1400/10/07 منتشر شده
است.
36,526
بـار بازدید شده