Satellite Dish Motor - How to set up a Free Satellite TV Dish!
54.8 هزار بار بازدید -
4 سال پیش
-
THE HAPPY SATELLITE NERD EPISODE
THE HAPPY SATELLITE NERD EPISODE 99
In this video I set up a MOTECK SG-2100 SATELLITE DISH MOTOR FTA HH SG2100 ROTOR!
Using USALS (Universal Satellites Automatic Location System) to perfectly align all of the Satellites in the Geostationary ark of the Satellites, to receive the #FreeSatelliteTV Channels.
You can get one of these and a dish system at Facebook: shop
www.FreeSatelliteTV.Net
#tech #FTA #FreeToAirSatellite
With the SG2100 motorized system the dish moves from east to west to track the satellites positioned along the Clarke belt. Good for any offset dish with a U-bolt or Pole mounting up to 120 cm satellite dish.
Works with all DiSEqC 1.2, 1.3, Goto X compliant receivers. It utilizes a data stream passed up the LNB coaxial lead to the mount. Only one coaxial cable is needed for installation.
MOTECK SG-2100 SATELLITE DISH MOTOR FTA HH SG2100 ROTOR
https://ebay.us/ikRXjS
39" HIGH GAIN KU BAND SATELLITE FTA DISH + DUAL LINEAR FREE TO AIR LNB 97 W 95
https://ebay.us/91ktFI
Amiko Mini HD265 FTA Receiver DVB-S2 H.265 HEVC With NTP
http://ebay.us/Y8JHoW
39 Dish, Motor and Dish https://ebay.us/LgZX7V
FEATURES:
Fits all popular dish with 42mm tube
Special Design for any Receiver with DiSEqC 1.2
Only One Coaxial Cable Control
Go To X Function
Compact Structure
Ultra Low Noise
Three important parameters are required to correctly align a motorized c band (TVRO) dish for viewing the entire satellite arc or Clarke Belt.
1. Azimuth Angle (True South/Not Magnetic South);
2. Elevation Angle;
3. Declination Angle;
Use a compass to point your dish south and use the chart below to find your "modified" polar mount elevation and declination angle.
Once you start locking satellite transponders, fine tune your azimuth, elevation and declination angles until you peak all satellite signals. Lock down your dish.
https://www.tvrosat.com/resources.html
https://www.DishPointer.com/
To find Channels and Transponder frequencys http://SatHint.com/ and https://www.LyngSat.com/
-----------------------------------------------------------------------------------------------------------------
Go to the Dish Alignment table in your manual or on https://www.tvrosat.com/resources.html
Enter your Latatude and Elivation on the Motor. Mine was Lattude 44 and my Elivation was 46
For my Deinclination Angle on the DISH I subtracted the Declination Angle
(Degrees) 6.07° from the Elevation Angle (Degrees)44.66°
44.66° - 6.07° = 37.96 (37.96 Deinclination angle on the dish)
Use a compas to find your true south location.
go to www.DishPointer.com and find your latitude and longitude. Enter that into your receivers USALS (Universal Satellites Automatic Location System) under your motor settings.
The plumb pole is real critical with these setups.
And to find your true south satellite go to the one closest to your highest most southern part of the ark (True South should be 0 on the motor) on where your Longitude is set to the closest sat you can lock to that.
In my case I am at 76.48 West so I moved the dish's Azimuth to 87 west. And then adjusted the Azimuth until I got signal on the receiver.
I did adjust the Declination angle on the dish to fine tune the signal by a hair and got better signal. Moved it half a baby finger and lost signal.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++
Need a VPN
Using the Express VPN Service Please Sing up here and Click on my referral link.
https://www.linkev.com/?a_fid=freesat...
+++++++++++++++++++++++++++++++++++++++++++++++++++++++
please consider supporting my work
https://www.paypal.com/donate/?token=...
Patreon: RobbieStrike
Learn about Satellite and other things by sitting back and binging on these playlists
ottawaoctane
Buy This Stuff - Facebook: shop
ottawaoctane
Facebook: RobbieStrikeVideos
Twitter: robbiestrike3
(c) Robbie Strike 2020 http://www.RobbieStrike.com
www.FreeSatelliteTV.net
Intro: (0:00)
Dish Pointer website: (0:46)
SatFinder Light Android app for you phone: (2:08)
SatHint and websites that list free channels!; (2:42)
Satellite Dish Motor unboxing: (4:06)
Satellite Finder Kit: (8:11)
Attaching the satellite dish to the motor: (9:30)
Setting up a motorized satellite dish on a Tripod: (10:40)
Dish moving to different satellite positions: (13:05)
Calculate you Deinclination Angle: (13:29)
True South: (14:56)
Set up USALS on a satellite receiver:(15:57)
Galaxy 19 97 west: (16:59)
Satellite Receiver Settings: (17:45)
Satellite switches DiSEqC and 22k and Splitters: (19:12)
Don't let this happen to you: (23:06)
Dish moving across the geostationary ark: (23:19)
Channels: (26:25)
In this video I set up a MOTECK SG-2100 SATELLITE DISH MOTOR FTA HH SG2100 ROTOR!
Using USALS (Universal Satellites Automatic Location System) to perfectly align all of the Satellites in the Geostationary ark of the Satellites, to receive the #FreeSatelliteTV Channels.
You can get one of these and a dish system at Facebook: shop
www.FreeSatelliteTV.Net
#tech #FTA #FreeToAirSatellite
With the SG2100 motorized system the dish moves from east to west to track the satellites positioned along the Clarke belt. Good for any offset dish with a U-bolt or Pole mounting up to 120 cm satellite dish.
Works with all DiSEqC 1.2, 1.3, Goto X compliant receivers. It utilizes a data stream passed up the LNB coaxial lead to the mount. Only one coaxial cable is needed for installation.
MOTECK SG-2100 SATELLITE DISH MOTOR FTA HH SG2100 ROTOR
https://ebay.us/ikRXjS
39" HIGH GAIN KU BAND SATELLITE FTA DISH + DUAL LINEAR FREE TO AIR LNB 97 W 95
https://ebay.us/91ktFI
Amiko Mini HD265 FTA Receiver DVB-S2 H.265 HEVC With NTP
http://ebay.us/Y8JHoW
39 Dish, Motor and Dish https://ebay.us/LgZX7V
FEATURES:
Fits all popular dish with 42mm tube
Special Design for any Receiver with DiSEqC 1.2
Only One Coaxial Cable Control
Go To X Function
Compact Structure
Ultra Low Noise
Three important parameters are required to correctly align a motorized c band (TVRO) dish for viewing the entire satellite arc or Clarke Belt.
1. Azimuth Angle (True South/Not Magnetic South);
2. Elevation Angle;
3. Declination Angle;
Use a compass to point your dish south and use the chart below to find your "modified" polar mount elevation and declination angle.
Once you start locking satellite transponders, fine tune your azimuth, elevation and declination angles until you peak all satellite signals. Lock down your dish.
https://www.tvrosat.com/resources.html
https://www.DishPointer.com/
To find Channels and Transponder frequencys http://SatHint.com/ and https://www.LyngSat.com/
-----------------------------------------------------------------------------------------------------------------
Go to the Dish Alignment table in your manual or on https://www.tvrosat.com/resources.html
Enter your Latatude and Elivation on the Motor. Mine was Lattude 44 and my Elivation was 46
For my Deinclination Angle on the DISH I subtracted the Declination Angle
(Degrees) 6.07° from the Elevation Angle (Degrees)44.66°
44.66° - 6.07° = 37.96 (37.96 Deinclination angle on the dish)
Use a compas to find your true south location.
go to www.DishPointer.com and find your latitude and longitude. Enter that into your receivers USALS (Universal Satellites Automatic Location System) under your motor settings.
The plumb pole is real critical with these setups.
And to find your true south satellite go to the one closest to your highest most southern part of the ark (True South should be 0 on the motor) on where your Longitude is set to the closest sat you can lock to that.
In my case I am at 76.48 West so I moved the dish's Azimuth to 87 west. And then adjusted the Azimuth until I got signal on the receiver.
I did adjust the Declination angle on the dish to fine tune the signal by a hair and got better signal. Moved it half a baby finger and lost signal.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++
Need a VPN
Using the Express VPN Service Please Sing up here and Click on my referral link.
https://www.linkev.com/?a_fid=freesat...
+++++++++++++++++++++++++++++++++++++++++++++++++++++++
please consider supporting my work
https://www.paypal.com/donate/?token=...
Patreon: RobbieStrike
Learn about Satellite and other things by sitting back and binging on these playlists
ottawaoctane
Buy This Stuff - Facebook: shop
ottawaoctane
Facebook: RobbieStrikeVideos
Twitter: robbiestrike3
(c) Robbie Strike 2020 http://www.RobbieStrike.com
www.FreeSatelliteTV.net
Intro: (0:00)
Dish Pointer website: (0:46)
SatFinder Light Android app for you phone: (2:08)
SatHint and websites that list free channels!; (2:42)
Satellite Dish Motor unboxing: (4:06)
Satellite Finder Kit: (8:11)
Attaching the satellite dish to the motor: (9:30)
Setting up a motorized satellite dish on a Tripod: (10:40)
Dish moving to different satellite positions: (13:05)
Calculate you Deinclination Angle: (13:29)
True South: (14:56)
Set up USALS on a satellite receiver:(15:57)
Galaxy 19 97 west: (16:59)
Satellite Receiver Settings: (17:45)
Satellite switches DiSEqC and 22k and Splitters: (19:12)
Don't let this happen to you: (23:06)
Dish moving across the geostationary ark: (23:19)
Channels: (26:25)
4 سال پیش
در تاریخ 1399/03/22 منتشر شده
است.
54,816
بـار بازدید شده