DIY IRONLESS LINEAR SERVO-MOTOR ; Fast movements
31.4 هزار بار بازدید -
6 سال پیش
-
This is my DIY opensource
This is my DIY opensource Linear Servo-Motor.
You can see more details here:
https://www.instructables.com/id/DIY-...
Explenation of the Video:
First the Motor will rast into a predefined position. After that it will move at Full-Speed of around 200mm/s from the right side to the left side. The motor is controlled by an Arduino Microcontroller.
Specification:
Travel-Distance: 290mm
max. Travel-Speed: 200mm/s (at 24V; I think there is much more possible, but my coils are getting to hot above 24V)
accuracy: 0.3mm (remember there is just a 400pulse/rev Encoder)
cost: 100€ if you have all the tools like CNC-Mill and 3D-Printer at home.
You can see more details here:
https://www.instructables.com/id/DIY-...
Explenation of the Video:
First the Motor will rast into a predefined position. After that it will move at Full-Speed of around 200mm/s from the right side to the left side. The motor is controlled by an Arduino Microcontroller.
Specification:
Travel-Distance: 290mm
max. Travel-Speed: 200mm/s (at 24V; I think there is much more possible, but my coils are getting to hot above 24V)
accuracy: 0.3mm (remember there is just a 400pulse/rev Encoder)
cost: 100€ if you have all the tools like CNC-Mill and 3D-Printer at home.
6 سال پیش
در تاریخ 1397/10/12 منتشر شده
است.
31,486
بـار بازدید شده