How to make textured and dimensionally consistent game pieces using air dried clay.
73 بار بازدید -
2 ماه پیش
-
Using only DAS clay and
Using only DAS clay and some odds and ends from the hardware store, this video shows you how to make square pieces for the board game Tak.
Amazon Affiliate link (this does not cost you anything, but I get a small kickback if you buy using this link):
DAS air dry clay - https://amzn.to/3W3rCaD
Other materials can be purchased from your local hardware store:
¼-20 threaded rod
¼-20 nuts
Fender washers for threaded rod - I used 1¼ inch, but would go with 1½ or 1¾ inch if I did this again
Paint (optional or unnecessary if you get different colors of clay)
Other links:
My books on Amazon - https://amzn.to/3R07pQn
My Patreon - Patreon: beautiful_upgrades
Tak Talk Discord - Discord: discord
Amazon Affiliate link (this does not cost you anything, but I get a small kickback if you buy using this link):
DAS air dry clay - https://amzn.to/3W3rCaD
Other materials can be purchased from your local hardware store:
¼-20 threaded rod
¼-20 nuts
Fender washers for threaded rod - I used 1¼ inch, but would go with 1½ or 1¾ inch if I did this again
Paint (optional or unnecessary if you get different colors of clay)
Other links:
My books on Amazon - https://amzn.to/3R07pQn
My Patreon - Patreon: beautiful_upgrades
Tak Talk Discord - Discord: discord
2 ماه پیش
در تاریخ 1403/04/11 منتشر شده
است.
73
بـار بازدید شده