كاشف معادن عميق 3 أمتار - خطوات الاستقرار

كاشف المعادن  METAL DETECTOR
كاشف المعادن METAL DETECTOR
20 هزار بار بازدید - 2 سال پیش - Welcome.....the stability of the metal
Welcome.....the stability of the metal detector depth of three meters
How to reach the stage of stability in adequate detector and bfo devices
First: We wrap the coil in an orderly manner using a wire of (0.5-0.7) mm diameter
Second: After installing the coil, we put the wax used in the lighting on it
Third: We wrap the file with thin tin foil used in homes in order to isolate it from the earth's magnetism
Fourth: isolate the coils from the outside air using plastic tubes or inside a wooden frame
Fifth: Using ferrite on the small and large file frequently
Sixth: The use of variable capacitors (radio tuner) in the large and small coils, two variable capacitors for each coil, a minimum.
Seventh: Using capacitor No. 104 instead of capacitor No. 103 (100 nano instead of 10 nano) in all stages of building the device
In the end, if you adhere to what I mentioned in the previous points, you will reach an advanced stage of stability for the device, God willing, and God is the source of success
2 سال پیش در تاریخ 1401/07/27 منتشر شده است.
20,002 بـار بازدید شده
... بیشتر