Object Detection using Ultrasonic sensor and Arduino | Ultrasonic Sensor Projects | Arduino Projects
4.6 هزار بار بازدید -
4 سال پیش
-
This video explains to you
This video explains to you - How to detect an object using an ultrasonic sensor, Arduino Uno, and buzzer??
The video starts by explaining the circuit diagram of how to interface an ultrasonic sensor with an Arduino board and buzzer. The Ultrasonic sensor used here is the HC-SR04 sensor module which is connected with the Arduino board using jumper wires placed on the breadboard and also connected with a buzzer. The procedure of object detection using the ultrasonic sensor is easy i.e. when the sensor transmits any data and if any object is placed within the threshold distance as defined in the Arduino IDE code then the buzzer will receive a high signal and there will be a buzzing sound, alarming the owner that an Object is detected in the vicinity of the ultrasonic sensor.
Overall in this video, you will learn -
1. Interfacing an ultrasonic sensor with Arduino.
2. Interfacing a buzzer with Arduino.
Hardware used:
1. Arduino Uno board.
2. Ultrasonic Sensor - HC-SR04 module.
3. Piezo Buzzer.
4. Breadboard
5. Jumper wires.
For more information watch the video !!
Read the complete article - https://www.learnelectronicsindia.com...
Project By - Abhishek Goud
_______________________________________________
Other Electronics Learnings link
IoT Projects - https://rpst.page.link/rB62
Raspberry Pi Projects - https://rpst.page.link/sMqN
Basic Electronics - https://rpst.page.link/VJRu
Home Automation Projects - https://rpst.page.link/94L8
_______________________________________________
Thank You, ❤
Subscribe to #LearnElectronicsindia,
Connect and learn more at:
Website - https://www.learnelectronicsindia.com/
Facebook: Facebook: learnelectronics.india
Instagram: Instagram: learn_electronics_india
Linkedin: LinkedIn: learnelectronics
#arduinoprojects #ultrasonicsensor #buzzer #objectdetection #learnelectronics #diyprojects #electronicsprojects #miniprojects ArduinoultrasonicProject #UltrasonicsCode #ArduinoUltrasonicConnection #UltrasonicWorking
The video starts by explaining the circuit diagram of how to interface an ultrasonic sensor with an Arduino board and buzzer. The Ultrasonic sensor used here is the HC-SR04 sensor module which is connected with the Arduino board using jumper wires placed on the breadboard and also connected with a buzzer. The procedure of object detection using the ultrasonic sensor is easy i.e. when the sensor transmits any data and if any object is placed within the threshold distance as defined in the Arduino IDE code then the buzzer will receive a high signal and there will be a buzzing sound, alarming the owner that an Object is detected in the vicinity of the ultrasonic sensor.
Overall in this video, you will learn -
1. Interfacing an ultrasonic sensor with Arduino.
2. Interfacing a buzzer with Arduino.
Hardware used:
1. Arduino Uno board.
2. Ultrasonic Sensor - HC-SR04 module.
3. Piezo Buzzer.
4. Breadboard
5. Jumper wires.
For more information watch the video !!
Read the complete article - https://www.learnelectronicsindia.com...
Project By - Abhishek Goud
_______________________________________________
Other Electronics Learnings link
IoT Projects - https://rpst.page.link/rB62
Raspberry Pi Projects - https://rpst.page.link/sMqN
Basic Electronics - https://rpst.page.link/VJRu
Home Automation Projects - https://rpst.page.link/94L8
_______________________________________________
Thank You, ❤
Subscribe to #LearnElectronicsindia,
Connect and learn more at:
Website - https://www.learnelectronicsindia.com/
Facebook: Facebook: learnelectronics.india
Instagram: Instagram: learn_electronics_india
Linkedin: LinkedIn: learnelectronics
#arduinoprojects #ultrasonicsensor #buzzer #objectdetection #learnelectronics #diyprojects #electronicsprojects #miniprojects ArduinoultrasonicProject #UltrasonicsCode #ArduinoUltrasonicConnection #UltrasonicWorking
4 سال پیش
در تاریخ 1399/06/14 منتشر شده
است.
4,645
بـار بازدید شده