Mold Making Challenge: Bear Skull and Jawbone (Making Things with Milo)
26.8 هزار بار بازدید -
3 سال پیش
-
With a little forethought you
With a little forethought you can design the perfect mold of a complex model. Join Milo as he makes a two-part cavity pour mold of a skull he found while hiking using Dragon Skin 10 NV low-viscosity platinum silicone and Free Form AIR lightweight epoxy putty.
SORTA-Clear 12 is used to make a two-part block mold of the jaw using a spacer as a cost-cutting technique.
See PART 2 where Milo casts a stunning cold-cast nickel silver reproduction: Cold Casting a Bear Skull using Ureth...
0:00 - Project Goals
1:49 - Prepping the Skull
8:15 - Clay Up
12:11 - First Half Support Shell
15:17 - First Half Cavity Pour
18:41 - Second Half Support Shell
21:56 - Second Half Cavity Pour
25:34 - Jaw Bone Mold
32:53 - Outro
Adult Supervision Required
Keep Out Of Reach Of Children
---
Make It Now! with Smooth-On
https://www.smooth-on.com
Facebook: SmoothOn
Twitter: SmoothOn
Instagram: SmoothOn
SORTA-Clear 12 is used to make a two-part block mold of the jaw using a spacer as a cost-cutting technique.
See PART 2 where Milo casts a stunning cold-cast nickel silver reproduction: Cold Casting a Bear Skull using Ureth...
0:00 - Project Goals
1:49 - Prepping the Skull
8:15 - Clay Up
12:11 - First Half Support Shell
15:17 - First Half Cavity Pour
18:41 - Second Half Support Shell
21:56 - Second Half Cavity Pour
25:34 - Jaw Bone Mold
32:53 - Outro
Adult Supervision Required
Keep Out Of Reach Of Children
---
Make It Now! with Smooth-On
https://www.smooth-on.com
Facebook: SmoothOn
Twitter: SmoothOn
Instagram: SmoothOn
3 سال پیش
در تاریخ 1400/07/15 منتشر شده
است.
26,829
بـار بازدید شده