Build your own aquaponics garden
271.3 هزار بار بازدید -
6 سال پیش
-
Jerry Coleby-Williams visits environmental scientist
Jerry Coleby-Williams visits environmental scientist Kieran Richardt in an industrial estate to see his teaching space, which includes an aquaponic green wall.
The self-contained recirculating system contains fish in a reservoir at its base, so the green wall is watered with fertiliser-rich fish waste. It shows ways of tying terrestrial and aquatic environments.
Grow lamps are used to give the plants UV light and perennial plants such as flamingo flower (Anthurium ‘Pure Red Queen’), rasp fern (Doodia aspera), kangaroo fern (Phlebodium aureum syn. Polypodium aureum), maidenhair fern (Adiantum raddianum), crested fern (Pleopeltis fallax syn. Polypodium fallax), and pitcher plants (Nepenthes maxima x ventricosa) are used to create the living wall.
To create your own green wall, budget for about $500 worth of materials; you’ll need to be able to use some basic tools and have a few hours spare – the perfect weekend project.
You’ll Need
- Bitumastic cement paint (like you would use behind tiles in a
bathroom) if you don’t have a water proof wall
- Reservoir pond – either a plastic container or a wooden trough
(we used recycled treated timber) lined with pond lining
- Frame – to support the growing wall. Metal lasts longer, but you
could use wood – such as a recycled door frame
- Expanded PVC foam sheet and a cover, such as recycled PET felt,
which has lots of surface area for the growth of (good) bacteria
19mm irrigation pipe (long enough to exten along the top and
down one side) plus a stopper, an elbow and 4mm drippers –
enough to place one 20mm apart along its top length
- Stanley knife, screws, drill, measuring tape
- Plants such as ferns, orchids, flamingo flowers, pitcher plants and
other epiphytes
- Fish
Method
- If necessary, paint your wall with bitumastic paint
- Make the wooden trough. We predrilled the holes then connected
the timber using baton screws
- Line with either pond liner or a few layers of builder’s plastic
- Fix the liner into place using some timber batons, screwed into
place
- Trim off excess plastic
- Construct a frame to support your wall. We used a recycled
aluminium gate frame as the back of the wall.
- Bolt on your waterproof board (e.g. expanded PVC foam) to the
frame
- Staple your felt to the front of the board, keeping it tight but
allowing space to fit the dripper pipe at the top end. Do not wrap
excess fabric around the back until the dripper pipe is in place,
but trim the excess from the corners to make it easier to wrap
around later.
- Fit a stopper to one end of the 10mm pipe, and the elbow at the
other end. Now pierce holes to place 4mm drippers every 20cm
along the pipe.
- Place the pipe under the fabric at the top of the board and staple
it in place by folding over the excess fabric.
- Fix the frame into the pond, wrapping the legs in more felt to stop
any sharp edges from piercing the plastic
- Mark crosses every 10-15cm on the front of the felt where you
would like the plants to go, then cut with a Stanley knife.
- Remove the excess soil from your plants, poke them into the
holes in the felt and staple them into place
- Add your fish to the reservoir - make sure the water is room
temperature and that the water has been pH balanced first.
Other Tips
- Make sure the area has a strong enough structure to support your
wall and choose plants that suit the position. i.e. indoor plants for
an indoor position, sun-loving plants for outside etc. The walls
work equally well without fish, but to make it a complete
aquaponics system, you need fish. A traditional aquaponics set
would have fish for eating, however ornamental fish work just as
well. If you have fish, don’t forget to feed them, and if you don’t
have fish, don’t forget to feed the plants using liquid fertiliser. Top
up the water as necessary and partially change the water
regularly.
Watch Gardening Australia on ABC iview: http://iview.abc.net.au/programs/gard...
SUBSCRIBE: http://ab.co/GardeningYouTube
About Gardening Australia:
Gardening Australia is an ABC TV program providing gardening know-how and inspiration. Presented by Australia's leading horticultural experts, Gardening Australia is a valuable resource to all gardeners through the television program, the magazine, books, DVDs and extensive online content.
Connect with other Gardening Australia fans:
Like Gardening Australia on Facebook: Facebook: gardeningaustralia
Follow Gardening Australia on Instagram: Instagram: gardeningaustralia
Visit the Gardening Australia website: http://www.abc.net.au/gardening
This is an official Australian Broadcasting Corporation YouTube channel.
********
Contributions may be removed if they violate ABC's Online Conditions of Use http://www.abc.net.au/conditions.htm (Section 3).
The self-contained recirculating system contains fish in a reservoir at its base, so the green wall is watered with fertiliser-rich fish waste. It shows ways of tying terrestrial and aquatic environments.
Grow lamps are used to give the plants UV light and perennial plants such as flamingo flower (Anthurium ‘Pure Red Queen’), rasp fern (Doodia aspera), kangaroo fern (Phlebodium aureum syn. Polypodium aureum), maidenhair fern (Adiantum raddianum), crested fern (Pleopeltis fallax syn. Polypodium fallax), and pitcher plants (Nepenthes maxima x ventricosa) are used to create the living wall.
To create your own green wall, budget for about $500 worth of materials; you’ll need to be able to use some basic tools and have a few hours spare – the perfect weekend project.
You’ll Need
- Bitumastic cement paint (like you would use behind tiles in a
bathroom) if you don’t have a water proof wall
- Reservoir pond – either a plastic container or a wooden trough
(we used recycled treated timber) lined with pond lining
- Frame – to support the growing wall. Metal lasts longer, but you
could use wood – such as a recycled door frame
- Expanded PVC foam sheet and a cover, such as recycled PET felt,
which has lots of surface area for the growth of (good) bacteria
19mm irrigation pipe (long enough to exten along the top and
down one side) plus a stopper, an elbow and 4mm drippers –
enough to place one 20mm apart along its top length
- Stanley knife, screws, drill, measuring tape
- Plants such as ferns, orchids, flamingo flowers, pitcher plants and
other epiphytes
- Fish
Method
- If necessary, paint your wall with bitumastic paint
- Make the wooden trough. We predrilled the holes then connected
the timber using baton screws
- Line with either pond liner or a few layers of builder’s plastic
- Fix the liner into place using some timber batons, screwed into
place
- Trim off excess plastic
- Construct a frame to support your wall. We used a recycled
aluminium gate frame as the back of the wall.
- Bolt on your waterproof board (e.g. expanded PVC foam) to the
frame
- Staple your felt to the front of the board, keeping it tight but
allowing space to fit the dripper pipe at the top end. Do not wrap
excess fabric around the back until the dripper pipe is in place,
but trim the excess from the corners to make it easier to wrap
around later.
- Fit a stopper to one end of the 10mm pipe, and the elbow at the
other end. Now pierce holes to place 4mm drippers every 20cm
along the pipe.
- Place the pipe under the fabric at the top of the board and staple
it in place by folding over the excess fabric.
- Fix the frame into the pond, wrapping the legs in more felt to stop
any sharp edges from piercing the plastic
- Mark crosses every 10-15cm on the front of the felt where you
would like the plants to go, then cut with a Stanley knife.
- Remove the excess soil from your plants, poke them into the
holes in the felt and staple them into place
- Add your fish to the reservoir - make sure the water is room
temperature and that the water has been pH balanced first.
Other Tips
- Make sure the area has a strong enough structure to support your
wall and choose plants that suit the position. i.e. indoor plants for
an indoor position, sun-loving plants for outside etc. The walls
work equally well without fish, but to make it a complete
aquaponics system, you need fish. A traditional aquaponics set
would have fish for eating, however ornamental fish work just as
well. If you have fish, don’t forget to feed them, and if you don’t
have fish, don’t forget to feed the plants using liquid fertiliser. Top
up the water as necessary and partially change the water
regularly.
Watch Gardening Australia on ABC iview: http://iview.abc.net.au/programs/gard...
SUBSCRIBE: http://ab.co/GardeningYouTube
About Gardening Australia:
Gardening Australia is an ABC TV program providing gardening know-how and inspiration. Presented by Australia's leading horticultural experts, Gardening Australia is a valuable resource to all gardeners through the television program, the magazine, books, DVDs and extensive online content.
Connect with other Gardening Australia fans:
Like Gardening Australia on Facebook: Facebook: gardeningaustralia
Follow Gardening Australia on Instagram: Instagram: gardeningaustralia
Visit the Gardening Australia website: http://www.abc.net.au/gardening
This is an official Australian Broadcasting Corporation YouTube channel.
********
Contributions may be removed if they violate ABC's Online Conditions of Use http://www.abc.net.au/conditions.htm (Section 3).
6 سال پیش
در تاریخ 1397/10/16 منتشر شده
است.
271,326
بـار بازدید شده