Comgrow Filament dryer review and improvements
7.8 هزار بار بازدید -
2 سال پیش
-
The Comgrow filament dryer /
The Comgrow filament dryer / drybox that I bought needed two improvements.
First, the fan was noisy, so I replaced the 40x40x10 12V DC fan with a 24 volt version, so that it would run slower and quieter. (This did reduce the air circulation...but it is a small box).
The second is that it really only works well for "tall narrow" spools. You can fit two tall-narrow spools of filament into it just fine, but if you put a short/wide spool in that has a lot of filament, the filament will hit the center support beam. You might be able to cut out this support beam, but I didn't do that because I was worried it might have negative consequences for the structural stability of the spool rollers. Mostly, I'll be using it to dry filament, and not dispense it.
For $50, it is a quick and easy way to dry and store filament.
Amazon affiliate link:
amzn.to/3iSLrRd
2 سال پیش
در تاریخ 1401/10/28 منتشر شده
است.
7,863
بـار بازدید شده