Top-Down or Bottom-Up Assemblies? In Autodesk Fusion, You Can Do BOTH!

Autodesk Fusion
Autodesk Fusion
4.9 هزار بار بازدید - 3 ماه پیش - In this Autodesk Fusion YouTube
In this Autodesk Fusion YouTube video, we're talk about building assemblies from the SolidWorks perspective by breaking down the two basic approaches to creating assemblies: top-down approach and bottom-up. The top-down approach is where all the parts are designed in the context of a single design. The bottom-up approach is when each part of is designed inside of its own part file independently and then brought into the assembly. One of the many benefits of using Autodesk Fusion is that you can choose which method you want, at any point in time, and mix and match them. With the tips from this video and a clear understanding of your design intent, you will be able to make the best decision possible for your design.

►FREE TRIAL |  https://autode.sk/3Wtfi20
►SUBSCRIBE |  https://autode.sk/30njGGX
►GET STARTED | https://autode.sk/30k2DWh
►TRY AN EXTENSION | https://autode.sk/3EOUidW

CONNECT with Fusion on social media:

INSTAGRAM | https://autode.sk/2Enzh8P
TWITTER |  https://autode.sk/45cIYTK
LINKEDIN | https://autode.sk/3UyieZS
FACEBOOK | https://autode.sk/3WaaZLb
3 ماه پیش در تاریخ 1403/02/08 منتشر شده است.
4,928 بـار بازدید شده
... بیشتر