Tannoy Canterbury SE and Denon PMA 2500NE With DAC

Specifications
Power amplifier section
Rated Out­put Power:
2-chan­nel dri­ving (CD → SP OUT)
80 W + 80 W (8 Ω/ohms, 20 Hz - 20 kHz, T.H.D. 0.07 %)
160 W + 160 W (4 Ω/ohms, 1 kHz, T.H.D. 0.7 %)
Total har­monic dis­tor­tion:
0.01 % (Rated out­put: –3 dB), 8 Ω/ohms, 1 kHz
Out­put ter­mi­nals:
Speaker A or B: 4 – 16 Ω/ohms
Speaker A + B: 8 – 16 Ω/ohms
Suited for head­phones/stereo head­phones
Input Sen­si­tiv­ity/Input Im­ped­ance:
EXT.​PRE: 0.9 V / 47 kΩ/kohms
Am­pli­fi­ca­tion fac­tor: 29 dB
Pre amplifier section
Input Sen­si­tiv­ity/Input Im­ped­ance:
PHONO (MM): 2.5 mV / 47 kΩ/kohms
PHONO (MC): 200 μV / 100 Ω/ohms
CD, NET­WORK, AUX, RECORDER:
135 mV / 47 kΩ/kohms (SOURCE DI­RECT: Off)
135 mV / 23 kΩ/kohms (SOURCE DI­RECT: On)
RIAA De­vi­a­tion:
PHONO: 20 Hz – 20 kHz ±0.5 dB
Max­i­mum Input:
PHONO (MM): 130 mV / 1 kHz
PHONO (MC): 10 mV / 1 kHz
Overall performance
SN Ratio (A net­work):
PHONO (MM): 89 dB
(With input ter­mi­nals short-cir­cuited, 5 mV input sig­nal)
PHONO (MC): 74 dB
(With input ter­mi­nals short-cir­cuited, 0.5 mV input sig­nal)
CD, NET­WORK, AUX, RECORDER: 110 dB (input ter­mi­nals short-cir­cuited)
Fre­quency re­sponse:
5 Hz – 100 kHz (0 – -3 dB)
Tone con­trol:
BASS: 100 Hz ±8 dB
TRE­BLE: 10 kHz ±8 dB
Digital input signal format
For­mat:
Dig­i­tal audio in­ter­face (Lin­ear PCM)
Coax­ial input:
0.5 Vp-p / 75 Ω/ohms
Op­ti­cal input:
More than – 27 dBm
Op­ti­cal wave­length:
660 nm
General
Power sup­ply:
AC230 V, 50/60 Hz
Power con­sump­tion:
310 W
Power con­sump­tion in standby mode:
0.2 W