Solidworks simulations I Hollow aluminum post in compression
226 بار بازدید -
2 ماه پیش
-
A short post constructed from
A short post constructed from a hollow circular tube of aluminum supports a
compressive load of 26 kips. The inner and outer diameters of the
tube are d1 4.0 in. and d2 4.5 in., respectively, and its length is 16 in. The
shortening of the post due to the load is measured as 0.012 in.
Determine the compressive stress and strain in the post. (Disregard the
weight of the post itself, and assume that the post does not buckle under the
load.)
Use Solidworks simulation module to carry out analysis.
compressive load of 26 kips. The inner and outer diameters of the
tube are d1 4.0 in. and d2 4.5 in., respectively, and its length is 16 in. The
shortening of the post due to the load is measured as 0.012 in.
Determine the compressive stress and strain in the post. (Disregard the
weight of the post itself, and assume that the post does not buckle under the
load.)
Use Solidworks simulation module to carry out analysis.
2 ماه پیش
در تاریخ 1403/04/06 منتشر شده
است.
226
بـار بازدید شده