Humvee- Geared Hub Seals
4.6 هزار بار بازدید -
2 سال پیش
-
Read the Technical Manual but
Read the Technical Manual but check this out if you’re interested. Do get new locking washers and new 8 notch spindle nuts. There are other, even more secure, spindle nuts out there. Research those. Also, be prepared to buy any new bearings and the “spacer” gaskets that I mention. You may need them. I feel that I did not need those. Get some brakeclean to get the nooks and cranny’s clean. Clean up your gasket surfaces throughly prior to reassembly. I used Teflon tape to seal up my three screw in plugs. We’ll see how that works for me. Your comments will help the next man. Thanks for watching.
2 سال پیش
در تاریخ 1401/01/04 منتشر شده
است.
4,626
بـار بازدید شده