CB & HAM RADIO: Build a MAG-LOOP MKIII Works on 27Mhz CB & HAM Bands
45.6 هزار بار بازدید -
4 سال پیش
-
A New Mag-Loop build that
A New Mag-Loop build that works on the CB Bands without the need to use a capacitor!
Thats not to say that's where you leave the build, eventually you will need to add a capacitor of some description, be it an air spaced, vacuumed or even a trombone capacitor add one you will if you plan to use it on the Ham Bands.
A big shout out to Frank: Thanks Frank.. :)
https://www.nonstopsystems.com/radio/...
For my STL Loop:
7 X 62.5 cm Copper pipe 22mm Dia
2 X 30 cm Copper pipe 22mm Dia
8 X 45 Degree bends 22mm ID
1 X 15 cm Plastic Pipe 22mm ID
1 X 100 cm Coax for Coupling Loop
I do hope you enjoy it and subscribe for more..
Many thanks
Mike - M0MSN
To get notified of the next upload .click that bell and subscribe..
Thats not to say that's where you leave the build, eventually you will need to add a capacitor of some description, be it an air spaced, vacuumed or even a trombone capacitor add one you will if you plan to use it on the Ham Bands.
A big shout out to Frank: Thanks Frank.. :)
https://www.nonstopsystems.com/radio/...
For my STL Loop:
7 X 62.5 cm Copper pipe 22mm Dia
2 X 30 cm Copper pipe 22mm Dia
8 X 45 Degree bends 22mm ID
1 X 15 cm Plastic Pipe 22mm ID
1 X 100 cm Coax for Coupling Loop
I do hope you enjoy it and subscribe for more..
Many thanks
Mike - M0MSN
To get notified of the next upload .click that bell and subscribe..
4 سال پیش
در تاریخ 1399/09/29 منتشر شده
است.
45,678
بـار بازدید شده