DIY Jeep Wrangler How to Test Crank Position Sensor
44 هزار بار بازدید -
6 سال پیش
-
Get the Power Probe 4
Get the Power Probe 4 here https://amzn.to/2sNnLQV
Canadians Can get the Power Probe 4 here https://amzn.to/2MlMEvV
Todays video i'm showing you how to test the Crank Position on a 1999 Tj with a 4.0 engine. The new TJ's the Crank Position sensor is on the Transmission passenger side. This test can be done without a scope to see if the sensor works or not. You will not be able to see a waveform that you would on a scope but with using the powerprobe 4 you'll be able to see the voltage. you need to slowly crank the engine by hand and verify that the sensor reads 5v then 0, 5 volts then 0
Canadians Can get the Power Probe 4 here https://amzn.to/2MlMEvV
Todays video i'm showing you how to test the Crank Position on a 1999 Tj with a 4.0 engine. The new TJ's the Crank Position sensor is on the Transmission passenger side. This test can be done without a scope to see if the sensor works or not. You will not be able to see a waveform that you would on a scope but with using the powerprobe 4 you'll be able to see the voltage. you need to slowly crank the engine by hand and verify that the sensor reads 5v then 0, 5 volts then 0
6 سال پیش
در تاریخ 1397/11/02 منتشر شده
است.
44,059
بـار بازدید شده