HS256 Multi-start threading 2tpi 2start – Part 1
2.6 هزار بار بازدید -
4 ماه پیش
-
A two part topic, cutting
A two part topic, cutting a 2tpi 2start thread on a Harrison 140 metric lathe. The coarsest threads the lathe will cut as standard are 7mm metric pitch or 4tpi imperial so I had to figure out a new gearing setup and then find the best method to cut multi-start threads.
4 ماه پیش
در تاریخ 1403/03/03 منتشر شده
است.
2,616
بـار بازدید شده