🛑 STOP Tripping the RCD - Earth Fault Loop Impedance Test
13.4 هزار بار بازدید -
2 سال پیش
-
In this video Marcus explains
In this video Marcus explains why we set our MFT tester to 3 lead low and not 2 lead high in order to carryout an earth fault loop impedance on a circuit that has RCD protection. So we can carryout a earth fault loop impedance test it is important to select the correct setting on an MFT tester but do you understand why we often select 3 lead low setting when testing for earth fault loop impedance...
🔵 Earth Fault Loop Impedance Test - 3 Lead Low or 2 Lead High Test Explained
Earth Fault Loop Impedance Test - 3 L...
This video has been designed to go on the YouTube shelf as a short video in portrait mode.
Videos are training aids for City and Guilds (C and G) and EAL courses Level 1, 2 and 3.
You can follow me day by day on Facebook, Instagram, Twitter and TikTok lookout for "GSH Electrical”.
▶️ FACEBOOK Facebook: gshelectrical
▶️ INSTAGRAM Instagram: BrIhZmrAYGDTmjMdb9lUNQodMevqsbDDki3qpQ0
▶️ TWITTER Twitter: gsh_electrical
▶️ TikTok https://vm.tiktok.com/ZMRBLFdhe/
#GSHElectrical #Electricaltrainingvideos #shorts
🔵 Earth Fault Loop Impedance Test - 3 Lead Low or 2 Lead High Test Explained
Earth Fault Loop Impedance Test - 3 L...
This video has been designed to go on the YouTube shelf as a short video in portrait mode.
Videos are training aids for City and Guilds (C and G) and EAL courses Level 1, 2 and 3.
You can follow me day by day on Facebook, Instagram, Twitter and TikTok lookout for "GSH Electrical”.
▶️ FACEBOOK Facebook: gshelectrical
▶️ INSTAGRAM Instagram: BrIhZmrAYGDTmjMdb9lUNQodMevqsbDDki3qpQ0
▶️ TWITTER Twitter: gsh_electrical
▶️ TikTok https://vm.tiktok.com/ZMRBLFdhe/
#GSHElectrical #Electricaltrainingvideos #shorts
2 سال پیش
در تاریخ 1401/04/28 منتشر شده
است.
13,482
بـار بازدید شده