Oxygen Not Included HowTo cool down Oxygen for your dupes
6.1 هزار بار بازدید -
3 سال پیش
-
In this video I explain
In this video I explain two methods to cool down the oxygen for your base. When you are in early game, the thermo regulator setup is fine, but you should switch to the aquatuner when reaching midgame. It will consume less power per provided cooling.
For the cooling loop, you can use midgame coolants such as polluted water or hydrocarbons.
In the cooling room you will need a liquid or gas with an ok heat transfer rate, such as any form of liquid water or liquid hydrocarbons. If you decide to use gases, you can go for nuclear fallout gas.
For comparisson of different liquid coolants:
Oxygen Not Included HowTo - Comparing...
Why always use Auqa Tuner instead of Thermo Regulator:
Oxygen Not Included HowTo - Comparing...
For the cooling loop, you can use midgame coolants such as polluted water or hydrocarbons.
In the cooling room you will need a liquid or gas with an ok heat transfer rate, such as any form of liquid water or liquid hydrocarbons. If you decide to use gases, you can go for nuclear fallout gas.
For comparisson of different liquid coolants:
Oxygen Not Included HowTo - Comparing...
Why always use Auqa Tuner instead of Thermo Regulator:
Oxygen Not Included HowTo - Comparing...
3 سال پیش
در تاریخ 1400/11/10 منتشر شده
است.
6,112
بـار بازدید شده