Rescreening and Repairing Phantom Retractable Screen
47.5 هزار بار بازدید -
4 سال پیش
-
This video shows how to
This video shows how to replace a torn or worn screen mesh in a Phantom Retractable Screen and restore it to work as good as new. It is not super hard to do, it just takes a little patience but it is well worthwhile.
If your screen mesh does not need to be replaced it is a simpler fix and you can watch my other shorter video here:
Tuning and Repairing Phantom Retracta...
Total Project Time: ~2 hours the first time, closer to 1 hour after you have done it once
What You Will Need:
- Screwdriver with multiple square drive bits
- Utility knife
- Painters tape
- Metal square edge for cutting screen
- 2"x4"x8' optional for cutting screen
- Plumber's GOOP
- Cleaner such as Simple Green
- Paper towels
- Silicone spray lubricant
- White Lithium Grease
If your screen mesh does not need to be replaced it is a simpler fix and you can watch my other shorter video here:
Tuning and Repairing Phantom Retracta...
Total Project Time: ~2 hours the first time, closer to 1 hour after you have done it once
What You Will Need:
- Screwdriver with multiple square drive bits
- Utility knife
- Painters tape
- Metal square edge for cutting screen
- 2"x4"x8' optional for cutting screen
- Plumber's GOOP
- Cleaner such as Simple Green
- Paper towels
- Silicone spray lubricant
- White Lithium Grease
4 سال پیش
در تاریخ 1400/01/16 منتشر شده
است.
47,552
بـار بازدید شده