how to make a Obstacle Avoiding Robot using Arduino uno and L293d with HC sr04 Sensor

Muhammad Ansar
Muhammad Ansar
112.4 هزار بار بازدید - 5 سال پیش - how to make a Obstacle
how to make a Obstacle Avoiding Robot using Arduino uno and L293d with HC sr04 Sensor

Code and Schematics :- https://marobotic.com/2023/11/12/obst...

This information is processed by the Arduino, L293D motor control shield and ultrasonic sensor hc-sr04. If the distance between the robot and the obstacle is less than 20cm, the Robot stops and scans in left and right directions for new distance using Servo Motor and Ultrasonic Sensor. If the distance towards the left side is more than that of the right side, the robot will prepare for a left turn. But first, it backs up a little bit and then activates the Left Wheel Motor in reversed in direction.

Components Details () {
Arduino Uno:- https://marobotic.com/product/arduino...
4 wheel robot car kit:- https://marobotic.com/product/4-wheel...
sg90 servo motor:- https://marobotic.com/product/mini-se...
L293D motor control shield:- https://marobotic.com/product/arduino...
Ultrasonic Sensor Holder:- https://marobotic.com/product/ultraso...
ultrasonic sensor hc-sr04:- https://marobotic.com/product/ultraso...
Female to Female jumper Wires:- https://marobotic.com/product/40-pin-...
18650 Battery Holder – 2 Cell:- https://marobotic.com/product/18650-b...
18650 Battery Cell 3.7V x 2:- https://marobotic.com/product/18650-b...
}

We regularly uploads exciting videos like this
Suscribe us For More Videos

Muhammad Ansar
+923378655465

Visit My Website:- https://marobotic.com/projects/
5 سال پیش در تاریخ 1398/11/15 منتشر شده است.
112,493 بـار بازدید شده
... بیشتر