How To Fit Van X Curtains On Volkswagen Caddy Maxi!
8 هزار بار بازدید -
3 سال پیش
-
Fitting Van-x blackout curtains to
Fitting Van-x blackout curtains to our Volkswagen caddy maxi. These are the curtains designed for the rear barn doors, however the process will be similar on every van-X curtain and every van. These are great curtains and I would highly recommend buying them for your van!
You will need the following tools:
• Drill
• Phillips Screwdriver
• Tape Measure
• Hacksaw.
INSRUCTIONS From Van-X
1. Carefully unpack the curtains - Please do not use a knife or a sharp blade.
2. Measure the window frame and cut the bottom rail accordingly. The rails are
slightly flexible and can be bent to fit the contour/corners of the window if
required but please allow for this in your measurements. Our Plastic Bending tool
can help you with this. Simply screw the tool down to a piece of wood or a
workbench. Then feed the rail through and gently pull to bend. Repeat the
process for the top rail.
Please Note: Window sizes can vary so please make sure you measure for the top
and the bottom rails individually.
THE FLAT RAILS MUST FIT, JUST ABOVE/BELOW THE GLASS, WITHIN THE WINDOW
FRAMES.
3. Decide where you would like your screws to go and drill the holes accordingly.
These holes need to be made in the widest channel of the rail. Now fix your
screws into the rails and the metal frame. We recommend that you use 4-5
screws per rail. Please note: When attaching the rails to the metal frame please
make sure the edge with the widest channel is facing the window.
4. FOR VOLKSWAGEN TRANSPORTER T4 MODELS ONLY (BARN DOOR WINDOWS),
Please make sure that the widest channel is positioned away from the
window for the bottom rail. This is simply to allow some space when carefully
removing a notch for the door lock. (If required, carefully cut this out with a
pair of snips/ hacksaw.) – Please refer to the image below to see an example
how it should fit around the lock.
5. You are now ready to attach your curtains. We recommend that you slide 4-5
hooks along your top rail making sure that the poppers are on the outer side of
the material. You may want to attach one end cap to each rail at this point to
stop the curtain sliding out.
6. Gently stretch the curtain and fit the 4 or 5 opposite hooks to the bottom rail. It is
easier if you have someone to help you by holding the top end of the curtain in
place (These van-x curtains are designed to stretch).
7. Continue the process until all the hooks are fitted through the rail. (The result of
the curtain hooks all slid inside both rails can be seen in the image below.)
8. At this point, make sure that you have fitted all of the end caps to the rails.
9. Now that the curtains are fitted, look at both the ends of the curtain with the
poppers facing the outer edges as these need to be attached to the side of the
window frame. To fit the 8 male poppers please fix where necessary with a rivet
or the last remaining 8 screws included in this kit. (Please view the image below for
an example how the male poppers at the side of the window frame align with the
female popper off the curtains.)
10. There are 2 tie-backs supplied within the kit, these are used to attach around the
curtains so they stay in place on their own.
11. Your new Van-X Curtains are now ready!
You can buy the curtains here,
https://van-x.co.uk/product/vw-caddy-...
Products used for van conversions, (Please let me know in the comments if links are broken.)
Sound Deadening
https://amzn.to/39DMzUt
Insulation
https://amzn.to/3yaKmcD
Thermawrap
https://amzn.to/3xC1Nkw
Aluminium Tape
https://amzn.to/3xK0znt
4 Way Stretch Carpet
https://amzn.to/3n6y0f3
Lanyard
https://amzn.to/3xGunl6
Double Sided Tape
https://amzn.to/3QD9Whp
Wind Deflectors
https://amzn.to/39DLQmd
Seat Covers
https://dryrobe.com/products/dryrobe-...
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel so I can continue to provide you with free content each week!
Although very informative, these videos are for entertainment purposes.
If you like my videos please give them a like and consider subscribing to the channel!
👉 SUBSCRIBE Here! - @willsvanadventures
SEE MORE VIDEOS ▶️
🎬 VW Caddy Maxi Conversion | Micro Camper Van Tour! - Volkswagen Caddy Maxi Conversion | Mi...
🎬 How To Clad Your Van With Tongue & Groove Cladding! - How To Clad Your VW Caddy Camper With...
FOLLOW ME TO SEE MORE OF MY PROJECTS! 🌎
🎬 YouTube - @willsvanadventures
📸 Instagram - Instagram: will_evans_youtube
👍 Facebook - https://www.facebook.com/Will-Evans-Y...
🌐 Website - https://www.willsvanadventures.co.uk/
#caddy #vwconversion #vanconversion #vanlife
You will need the following tools:
• Drill
• Phillips Screwdriver
• Tape Measure
• Hacksaw.
INSRUCTIONS From Van-X
1. Carefully unpack the curtains - Please do not use a knife or a sharp blade.
2. Measure the window frame and cut the bottom rail accordingly. The rails are
slightly flexible and can be bent to fit the contour/corners of the window if
required but please allow for this in your measurements. Our Plastic Bending tool
can help you with this. Simply screw the tool down to a piece of wood or a
workbench. Then feed the rail through and gently pull to bend. Repeat the
process for the top rail.
Please Note: Window sizes can vary so please make sure you measure for the top
and the bottom rails individually.
THE FLAT RAILS MUST FIT, JUST ABOVE/BELOW THE GLASS, WITHIN THE WINDOW
FRAMES.
3. Decide where you would like your screws to go and drill the holes accordingly.
These holes need to be made in the widest channel of the rail. Now fix your
screws into the rails and the metal frame. We recommend that you use 4-5
screws per rail. Please note: When attaching the rails to the metal frame please
make sure the edge with the widest channel is facing the window.
4. FOR VOLKSWAGEN TRANSPORTER T4 MODELS ONLY (BARN DOOR WINDOWS),
Please make sure that the widest channel is positioned away from the
window for the bottom rail. This is simply to allow some space when carefully
removing a notch for the door lock. (If required, carefully cut this out with a
pair of snips/ hacksaw.) – Please refer to the image below to see an example
how it should fit around the lock.
5. You are now ready to attach your curtains. We recommend that you slide 4-5
hooks along your top rail making sure that the poppers are on the outer side of
the material. You may want to attach one end cap to each rail at this point to
stop the curtain sliding out.
6. Gently stretch the curtain and fit the 4 or 5 opposite hooks to the bottom rail. It is
easier if you have someone to help you by holding the top end of the curtain in
place (These van-x curtains are designed to stretch).
7. Continue the process until all the hooks are fitted through the rail. (The result of
the curtain hooks all slid inside both rails can be seen in the image below.)
8. At this point, make sure that you have fitted all of the end caps to the rails.
9. Now that the curtains are fitted, look at both the ends of the curtain with the
poppers facing the outer edges as these need to be attached to the side of the
window frame. To fit the 8 male poppers please fix where necessary with a rivet
or the last remaining 8 screws included in this kit. (Please view the image below for
an example how the male poppers at the side of the window frame align with the
female popper off the curtains.)
10. There are 2 tie-backs supplied within the kit, these are used to attach around the
curtains so they stay in place on their own.
11. Your new Van-X Curtains are now ready!
You can buy the curtains here,
https://van-x.co.uk/product/vw-caddy-...
Products used for van conversions, (Please let me know in the comments if links are broken.)
Sound Deadening
https://amzn.to/39DMzUt
Insulation
https://amzn.to/3yaKmcD
Thermawrap
https://amzn.to/3xC1Nkw
Aluminium Tape
https://amzn.to/3xK0znt
4 Way Stretch Carpet
https://amzn.to/3n6y0f3
Lanyard
https://amzn.to/3xGunl6
Double Sided Tape
https://amzn.to/3QD9Whp
Wind Deflectors
https://amzn.to/39DLQmd
Seat Covers
https://dryrobe.com/products/dryrobe-...
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel so I can continue to provide you with free content each week!
Although very informative, these videos are for entertainment purposes.
If you like my videos please give them a like and consider subscribing to the channel!
👉 SUBSCRIBE Here! - @willsvanadventures
SEE MORE VIDEOS ▶️
🎬 VW Caddy Maxi Conversion | Micro Camper Van Tour! - Volkswagen Caddy Maxi Conversion | Mi...
🎬 How To Clad Your Van With Tongue & Groove Cladding! - How To Clad Your VW Caddy Camper With...
FOLLOW ME TO SEE MORE OF MY PROJECTS! 🌎
🎬 YouTube - @willsvanadventures
📸 Instagram - Instagram: will_evans_youtube
👍 Facebook - https://www.facebook.com/Will-Evans-Y...
🌐 Website - https://www.willsvanadventures.co.uk/
#caddy #vwconversion #vanconversion #vanlife
3 سال پیش
در تاریخ 1400/06/19 منتشر شده
است.
8,074
بـار بازدید شده