Making A Printing Press / DIY Vertical Surface Press / Clamp
103.3 هزار بار بازدید -
7 سال پیش
-
In this video I make
In this video I make a vertical printing or surface press. You will need the following parts.
• 4 length of 300mm 12mm threaded rod.
• 1 length of 250mm 12mm threaded rod.
• 17 flanged M12 nuts.
• 18 35mm 12mm mudguard washers
• 4 pieces of 36mm long ½ inch copper pipe.
• 6 piececs of 18mm 400mm by 313mm ply / mdf.
• Two pieces of 18mm 193mm x 193mm
• Some nails to tack the piece while gluing.
• 2 m12 Stud Connectors Nuts
• 12mm x 120mm x 240mm Aluminium Plate
• 6 M6 60mm Flanged Machines Screws
• 6 M6 large washers
• 6 M6 Nuts
You can download the supporting via: miscpro.com/2017/04/25/diy-vertical-press-printing…
Instagram: instagram.com/savvas_papasavva
New Channel: youtube.com/EducatingSavvas
7 سال پیش
در تاریخ 1396/02/05 منتشر شده
است.
103,396
بـار بازدید شده