Make your own HIGH OUTPUT alternator! - Part 2: The Modifications!
168.4 هزار بار بازدید -
6 سال پیش
-
NOTE: I ended up removing
NOTE: I ended up removing the heatshrink from the upright pins as it made assembly a bit annoying.
Just a short series of 2 or 3 videos showing the process to tear down and modify your own alternator into a 320amp unit!
If you have any questions or comments, feel free to post in the comments section, as I'd rather have all questions in one place, so I don't have to answer them 10 times.
Happy Bassing!
See part 1 here: Make your own HIGH OUTPUT alternator!...
Part 3, The reassembly:
Make your own HIGH OUTPUT alternator!...
Load Testing:
Load testing a modified 320 amp alter...
Just a short series of 2 or 3 videos showing the process to tear down and modify your own alternator into a 320amp unit!
If you have any questions or comments, feel free to post in the comments section, as I'd rather have all questions in one place, so I don't have to answer them 10 times.
Happy Bassing!
See part 1 here: Make your own HIGH OUTPUT alternator!...
Part 3, The reassembly:
Make your own HIGH OUTPUT alternator!...
Load Testing:
Load testing a modified 320 amp alter...
6 سال پیش
در تاریخ 1397/10/29 منتشر شده
است.
168,410
بـار بازدید شده