AC Input Control Setup with the ME-ARC Remote

This video is designed to help guide you through the screens of the ME-ARC revision 4.0 in order to setup your AC Input parameters. Other revisions may show slightly different screens, but this video should get you through the basics of programming. AC In is designed to allow the inverter to only connect to an AC source during a specific event. Generally, you would use this if you had grid power and only wanted to connect to it in the event of a low battery charge or perhaps a certain time of day when the grid power is cheaper. Please note that this video is not meant to go over every possible scenario, but rather give you an idea of how to program your system for your particular setup. Please refer to your owner’s manual for more in-depth information.

To find out if the Magnum Energy advanced remote control is right for your system, visit SensataPower.com.

• #science_technology
• #magnum_energy
• #sensata_power
• #me_arc
• #advanced_remote_control
• #grid_power
• #ac_input
• #setup
• #guide
• #how_to
• #solar
• #pv
• #battery_backup
• #inverter