Bending tungsten
17.2 هزار بار بازدید -
6 سال پیش
-
I have had a few
I have had a few people ask me how to bend tungsten for tig welding.
well here is a little trick I learned from an old timer when you get into a tight spot where you cant get the tig torch in. I do recommend a large cup and turn the flow up. this is strictly to get out of a jam and works great.
well here is a little trick I learned from an old timer when you get into a tight spot where you cant get the tig torch in. I do recommend a large cup and turn the flow up. this is strictly to get out of a jam and works great.
6 سال پیش
در تاریخ 1397/06/11 منتشر شده
است.
17,252
بـار بازدید شده