Computer Aided Manufacturing (CAM)
40.7 هزار بار بازدید -
12 سال پیش
-
CAM; Computer Aided Manufacturing. Marshall
CAM; Computer Aided Manufacturing. Marshall Manufacturing Company offers computer aided manufacturing
https://www.marshallmfg.com
Esprit & Cagila
Computer Aided Manufacturing or CAM utilizes the part geometry defined by the CAD drawing. That geometry is imported into the CAM software, which allows the engineer to select cutting paths and other process parameters for manufacturing a specific part.
CAM uses data bases that are specific to the material, tools and the work center to be used in the actual machining process. The programmer identifies the manufacturing process information using the CAM software which includes feeds, speeds, depths of cut, for example. This information is run through the post processor, which translates the information into a CNC program the work center can use directly to machine the part.
The CAM system can also simulate the production cycle of the part, which includes a visual representation of the machine / tooling / work piece motion. The software can provide an estimated cycle time that can be used for quoting. It will also alert the engineer of any tool collisions, constraints or interference that may occur.
https://www.marshallmfg.com
Esprit & Cagila
Computer Aided Manufacturing or CAM utilizes the part geometry defined by the CAD drawing. That geometry is imported into the CAM software, which allows the engineer to select cutting paths and other process parameters for manufacturing a specific part.
CAM uses data bases that are specific to the material, tools and the work center to be used in the actual machining process. The programmer identifies the manufacturing process information using the CAM software which includes feeds, speeds, depths of cut, for example. This information is run through the post processor, which translates the information into a CNC program the work center can use directly to machine the part.
The CAM system can also simulate the production cycle of the part, which includes a visual representation of the machine / tooling / work piece motion. The software can provide an estimated cycle time that can be used for quoting. It will also alert the engineer of any tool collisions, constraints or interference that may occur.
12 سال پیش
در تاریخ 1391/12/21 منتشر شده
است.
40,711
بـار بازدید شده