How To Make A Kahler Flutter

Did you know you can make a Kahler flutter like a Floyd Rose? I didn't until someone showed me how!

There was just one problem, this is a Flyer and it doesn't have a clutch. Fortunately for me all cam based Kahlers are interchangeable so I just took a cam from an old Hybrid and made it happen!

00:00 Introduction
01:01 Why the Flyer won't flutter
02:09 Removing the bridge
03:00 The differences between cams on the Professional, Flyer, and Hybrid
03:39 Remove the springs and popping the cam off
04:17 Taking off the string hook assembly and the spring tensioner
04:46 How the spring tensioner works
05:31 Putting the string hook assembly back on
06:31 Re-installing the cam
07:08 A close look at how the spring tensioner works
07:47 Re-installing the bridge
09:24 Set the fine tuners in the middle and rough adjust the tension spring
09:57 Tune it up
10:22 Time to check the clutch
10:57 Tighten the clutch a bit more to stop the noise
11:27 With 9s and regular springs it will flutter better but the problem is still solved
11:40 I will do a much more in depth video on the different cams and rollers very soon

• #music
• #kahler_tremolo
• #kahler_flyer
• #kahler_flutter
• #tremolo_flutter
• #kahler_cam_based_trem
• #kahler_2300
• #kahler_hybrid
• #kahler_x_trem
• #gary_kahler
• #floyd_rose_flutter_technique
• #how_to_make_floyd_rose_flutter
• #floyd_rose_1000_flutter
• #floyd_rose_flutter
• #replacing_a_kahler_cam
• #kahler_flyer_setup
• #whammy_bar
• #whammy_bar_tricks
• #whammy_bar_sound
• #whammy_bar_flutter
• #tremolo_flutter_setup
• #tremolo_flutter_technique
• #guitar_tremolo_flutter
• #gary_kahler
• #rexylab
• #eddie_curnan