How To Replace O2 Sensor 2008-2012 Ford Escape
92.7 هزار بار بازدید -
4 سال پیش
-
Buy Now!New O2 Oxygen Sensor
Buy Now!
New O2 Oxygen Sensor from 1AAuto.com http://1aau.to/ib/1AEOS00217
The Oxygen (O2) sensors help monitor the emissions system in your vehicle. They measure the amount of oxygen passing through the exhaust, which informs the computer about proper fuel/air mixture, and the condition of the catalytic converter. Over time, the sensors may fail due to contamination, or reaching the end of their service life. TRQ offers new O2 sensors made to manufacturer’s specifications. This video shows you how to install new TRQ oxygen sensors on your 2008-2012 Ford Escape.
• Check here for more videos on the 2008-12 Ford Escape: Ford Escape 2008-2012 2nd Gen
This process should be similar on the following vehicles:
2008 Ford Escape
2009 Ford Escape
2010 Ford Escape
2011 Ford Escape
2012 Ford Escape
Tools you will need:
• 8mm Wrench http://1aau.to/oa/1AXAA00011
• O2 Sensor Socket
• Ratchet http://1aau.to/oa/1AXAA00016
Subscribe: @trq
Check out our playlist:
Ford Escape 2008-2012 2nd Gen: Ford Escape 2008-2012 2nd Gen
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
New O2 Oxygen Sensor from 1AAuto.com http://1aau.to/ib/1AEOS00217
The Oxygen (O2) sensors help monitor the emissions system in your vehicle. They measure the amount of oxygen passing through the exhaust, which informs the computer about proper fuel/air mixture, and the condition of the catalytic converter. Over time, the sensors may fail due to contamination, or reaching the end of their service life. TRQ offers new O2 sensors made to manufacturer’s specifications. This video shows you how to install new TRQ oxygen sensors on your 2008-2012 Ford Escape.
• Check here for more videos on the 2008-12 Ford Escape: Ford Escape 2008-2012 2nd Gen
This process should be similar on the following vehicles:
2008 Ford Escape
2009 Ford Escape
2010 Ford Escape
2011 Ford Escape
2012 Ford Escape
Tools you will need:
• 8mm Wrench http://1aau.to/oa/1AXAA00011
• O2 Sensor Socket
• Ratchet http://1aau.to/oa/1AXAA00016
Subscribe: @trq
Check out our playlist:
Ford Escape 2008-2012 2nd Gen: Ford Escape 2008-2012 2nd Gen
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
4 سال پیش
در تاریخ 1399/09/26 منتشر شده
است.
92,784
بـار بازدید شده